isdn4linux is getting removed, and the gigaset driver can still
use the CAPI support, so this can all go away.
Signed-off-by: Arnd Bergmann <a...@arndb.de>
---
Documentation/isdn/README.gigaset | 36 +-
drivers/isdn/gigaset/Kconfig | 22 +-
drivers/isdn/gigaset/Makefile | 5 +-
drivers/isdn/gigaset/dummyll.c | 77 ----
drivers/isdn/gigaset/i4l.c | 695 ------------------------------
5 files changed, 10 insertions(+), 825 deletions(-)
delete mode 100644 drivers/isdn/gigaset/dummyll.c
delete mode 100644 drivers/isdn/gigaset/i4l.c
diff --git a/Documentation/isdn/README.gigaset
b/Documentation/isdn/README.gigaset
index 9b1ce277ca3d..f6184b637182 100644
--- a/Documentation/isdn/README.gigaset
+++ b/Documentation/isdn/README.gigaset
@@ -48,9 +48,8 @@ GigaSet 307x Device Driver
1.2. Software
--------
- The driver works with the Kernel CAPI subsystem as well as the old
- ISDN4Linux subsystem, so it can be used with any software which is able
- to use CAPI 2.0 or ISDN4Linux for ISDN connections (voice or data).
+ The driver works with the Kernel CAPI subsystem and can be used with any
+ software which is able to use CAPI 2.0 for ISDN connections (voice or
data).
There are some user space tools available at
https://sourceforge.net/projects/gigaset307x/
@@ -92,7 +91,7 @@ GigaSet 307x Device Driver
gigaset debug debug level (see section 3.2.)
startmode initial operation mode (see section 2.5.):
- bas_gigaset ) 1=ISDN4linux/CAPI (default), 0=Unimodem
+ bas_gigaset ) 1=CAPI (default), 0=Unimodem
ser_gigaset )
usb_gigaset ) cidmode initial Call-ID mode setting (see section
2.5.): 1=on (default), 0=off
@@ -154,18 +153,10 @@ GigaSet 307x Device Driver
2.3. CAPI
----
- If the driver is compiled with CAPI support (kernel configuration option
- GIGASET_CAPI) the devices will show up as CAPI controllers as soon as the
- corresponding driver module is loaded, and can then be used with CAPI 2.0
- kernel and user space applications. For user space access, the module
- capi.ko must be loaded.
-
- Legacy ISDN4Linux applications are supported via the capidrv
- compatibility driver. The kernel module capidrv.ko must be loaded
- explicitly with the command
- modprobe capidrv
- if needed, and cannot be unloaded again without unloading the driver
- first. (These are limitations of capidrv.)
+ The devices will show up as CAPI controllers as soon as the
+ corresponding driver module is loaded, and can then be used with
+ CAPI 2.0 kernel and user space applications. For user space access,
+ the module capi.ko must be loaded.
Most distributions handle loading and unloading of the various CAPI
modules automatically via the command capiinit(1) from the capi4k-utils
@@ -173,16 +164,6 @@ GigaSet 307x Device Driver
Gigaset drivers because it doesn't support more than one module per
driver.
-2.4. ISDN4Linux
- ----------
- If the driver is compiled without CAPI support (native ISDN4Linux
- variant), it registers the device with the legacy ISDN4Linux subsystem
- after loading the module. It can then be used with ISDN4Linux
- applications only. Most distributions provide some configuration utility
- for setting up that subsystem. Otherwise you can use some HOWTOs like
- http://www.linuxhaven.de/dlhp/HOWTO/DE-ISDN-HOWTO-5.html
-
-
2.5. Unimodem mode
-------------
In this mode the device works like a modem connected to a serial port
@@ -281,8 +262,7 @@ GigaSet 307x Device Driver
number. Dialing "***" (three asterisks) calls all extensions
simultaneously (global call).
- This holds for both CAPI 2.0 and ISDN4Linux applications. Unimodem mode
- does not support internal calls.
+ Unimodem mode does not support internal calls.
2.8. Unregistered Wireless Devices (M101/M105)
-----------------------------------------
diff --git a/drivers/isdn/gigaset/Kconfig b/drivers/isdn/gigaset/Kconfig
index 83f62b8d82b5..805b5d034feb 100644
--- a/drivers/isdn/gigaset/Kconfig
+++ b/drivers/isdn/gigaset/Kconfig
@@ -1,6 +1,7 @@
menuconfig ISDN_DRV_GIGASET
tristate "Siemens Gigaset support"
depends on TTY
+ depends on ISDN_CAPI
select CRC_CCITT
select BITREVERSE
help
@@ -17,27 +18,6 @@ menuconfig ISDN_DRV_GIGASET
if ISDN_DRV_GIGASET
-config GIGASET_CAPI
- bool "Gigaset CAPI support"
- depends on ISDN_CAPI='y'||(ISDN_CAPI='m'&&ISDN_DRV_GIGASET='m')
- default 'y'
- help
- Build the Gigaset driver as a CAPI 2.0 driver interfacing with
- the Kernel CAPI subsystem. To use it with the old ISDN4Linux
- subsystem you'll have to enable the capidrv glue driver.
- (select ISDN_CAPI_CAPIDRV.)
- Say N to build the old native ISDN4Linux variant.
- If unsure, say Y.
-
-config GIGASET_I4L
- bool
- depends on ISDN_I4L='y'||(ISDN_I4L='m'&&ISDN_DRV_GIGASET='m')
- default !GIGASET_CAPI
-
-config GIGASET_DUMMYLL
- bool
- default !GIGASET_CAPI&&!GIGASET_I4L
-
config GIGASET_BASE
tristate "Gigaset base station support"
depends on USB
diff --git a/drivers/isdn/gigaset/Makefile b/drivers/isdn/gigaset/Makefile
index ac45a2739f56..f8ba14735bf1 100644
--- a/drivers/isdn/gigaset/Makefile
+++ b/drivers/isdn/gigaset/Makefile
@@ -1,8 +1,5 @@
# SPDX-License-Identifier: GPL-2.0
-gigaset-y := common.o interface.o proc.o ev-layer.o asyncdata.o
-gigaset-$(CONFIG_GIGASET_CAPI) += capi.o
-gigaset-$(CONFIG_GIGASET_I4L) += i4l.o
-gigaset-$(CONFIG_GIGASET_DUMMYLL) += dummyll.o
+gigaset-y := common.o interface.o proc.o ev-layer.o asyncdata.o capi.o
usb_gigaset-y := usb-gigaset.o
ser_gigaset-y := ser-gigaset.o
bas_gigaset-y := bas-gigaset.o isocdata.o
diff --git a/drivers/isdn/gigaset/dummyll.c b/drivers/isdn/gigaset/dummyll.c
deleted file mode 100644
index 570c2d53b84e..000000000000
diff --git a/drivers/isdn/gigaset/i4l.c b/drivers/isdn/gigaset/i4l.c
deleted file mode 100644
index b5b389e95edd..000000000000
--
2.20.0
