During driver initialization the driver sends a reset to the device and
waits for the firmware to signal that it is ready to continue.
Commit d2f372ba0914 ("mlxsw: pci: Increase PCI SW reset timeout")
increased the timeout to 13 seconds due to longer PHY calibration in
Spectrum-2 compared to Spectrum-1.
Recently it became apparent that this timeout is too short and therefore
this patch increases it again to a safer limit that will be reduced in
the future.
Fixes: c3ab435466d5 ("mlxsw: spectrum: Extend to support Spectrum-2 ASIC")
Fixes: d2f372ba0914 ("mlxsw: pci: Increase PCI SW reset timeout")
Signed-off-by: Ido Schimmel <ido...@mellanox.com>
Acked-by: Jiri Pirko <j...@mellanox.com>
---
drivers/net/ethernet/mellanox/mlxsw/pci_hw.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/mellanox/mlxsw/pci_hw.h
b/drivers/net/ethernet/mellanox/mlxsw/pci_hw.h
index ffee38e36ce8..8648ca171254 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/pci_hw.h
+++ b/drivers/net/ethernet/mellanox/mlxsw/pci_hw.h
@@ -27,7 +27,7 @@
#define MLXSW_PCI_SW_RESET 0xF0010
#define MLXSW_PCI_SW_RESET_RST_BIT BIT(0)
-#define MLXSW_PCI_SW_RESET_TIMEOUT_MSECS 13000
+#define MLXSW_PCI_SW_RESET_TIMEOUT_MSECS 20000
#define MLXSW_PCI_SW_RESET_WAIT_MSECS 100
#define MLXSW_PCI_FW_READY 0xA1844
#define MLXSW_PCI_FW_READY_MASK 0xFFFF
--
2.20.1
