+Ameen
Ian,
We couldn't find the root-cause from the logs/register-dump.
Could you please load the driver with link-debugs enabled, i.e., modprobe bnx2x
debug=0x4 or 'ethtool -s <interface> msglvl 0x4'. And collect the complete
kernel logs and the register-dump(collected before performing ifconfig-down).
Please also provide the output of "ethtool -i <interface>".
Thanks,
Sudarsana
> -----Original Message-----
> From: Ian Kumlien <ian.kuml...@gmail.com>
> Sent: Friday, April 12, 2019 4:39 PM
> To: Sudarsana Reddy Kalluru <skall...@marvell.com>
> Cc: Linux Kernel Network Developers <netdev@vger.kernel.org>; Ariel Elior
> <ael...@marvell.com>
> Subject: Re: bnx2x - odd behaviour
>
> On Fri, Apr 12, 2019 at 12:53 PM Sudarsana Reddy Kalluru
> <skall...@marvell.com> wrote:
> >
> > Hi Ian,
> > Thanks for your info/help. There's not much info in the logs (e.g., FW
> traces, calltraces). Will contact our firmware team on the register-dump
> analysis and provide you the update.
>
> Thank you =)
>
> > Thanks,
> > Sudarsana
> > > -----Original Message-----
> > > From: Ian Kumlien <ian.kuml...@gmail.com>
> > > Sent: Friday, April 12, 2019 2:44 PM
> > > To: Sudarsana Reddy Kalluru <skall...@marvell.com>
> > > Cc: Linux Kernel Network Developers <netdev@vger.kernel.org>; Ariel
> > > Elior <ael...@marvell.com>
> > > Subject: Re: bnx2x - odd behaviour
> > >
> > > Finally!
> > >
> > > Just had a machine with the same issue!
> > >
> > > On Thu, Apr 11, 2019 at 10:56 AM Ian Kumlien <ian.kuml...@gmail.com>
> > > wrote:
> > > >
> > > > On Thu, Apr 4, 2019 at 4:27 PM Sudarsana Reddy Kalluru
> > > > <skall...@marvell.com> wrote:
> > > > >
> > > > > Hi,
> > > > > We are not aware of this issue. Please collect the register
> > > > > dump i.e.,
> > > "ethtool -d <interface>" output when this issue happens (before
> > > performing
> > > link-flap) and share it for the analysis.
> > >
> > > Sent the dump separately :)
