The original patch didn't consider the case that autoneg process
finishes successfully but both link partners have no mode in common.
In this case there's no link, nevertheless we may be interested in
what the link partner advertised.
Like phydev->link we set phydev->autoneg_complete in
genphy_update_link() and use the stored value in genphy_read_status().
This way we don't have to read register BMSR again.
Fixes: b6163f194c69 ("net: phy: improve genphy_read_status")
Signed-off-by: Heiner Kallweit <hkallwe...@gmail.com>
---
drivers/net/phy/phy_device.c | 8 +++-----
include/linux/phy.h | 1 +
2 files changed, 4 insertions(+), 5 deletions(-)
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index de2b6333e..7669a01b0 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -1723,10 +1723,8 @@ int genphy_update_link(struct phy_device *phydev)
if (status < 0)
return status;
- if ((status & BMSR_LSTATUS) == 0)
- phydev->link = 0;
- else
- phydev->link = 1;
+ phydev->link = status & BMSR_LSTATUS ? 1 : 0;
+ phydev->autoneg_complete = status & BMSR_ANEGCOMPLETE ? 1 : 0;
return 0;
}
@@ -1757,7 +1755,7 @@ int genphy_read_status(struct phy_device *phydev)
linkmode_zero(phydev->lp_advertising);
- if (phydev->autoneg == AUTONEG_ENABLE && phydev->link) {
+ if (phydev->autoneg == AUTONEG_ENABLE && phydev->autoneg_complete) {
if (linkmode_test_bit(ETHTOOL_LINK_MODE_1000baseT_Half_BIT,
phydev->supported) ||
linkmode_test_bit(ETHTOOL_LINK_MODE_1000baseT_Full_BIT,
diff --git a/include/linux/phy.h b/include/linux/phy.h
index 34084892a..cfabd1a7c 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -390,6 +390,7 @@ struct phy_device {
unsigned autoneg:1;
/* The most recently read link state */
unsigned link:1;
+ unsigned autoneg_complete:1;
/* Interrupts are enabled */
unsigned interrupts:1;
--
2.21.0
