Sync ethtool-copy.h with linux-next from 03/28/2019. This provides
access to the new PHY tunable for Fast Link Down support.
Signed-off-by: Heiner Kallweit <hkallwe...@gmail.com>
---
ethtool-copy.h | 44 ++++++++++++++++++++++----------------------
1 file changed, 22 insertions(+), 22 deletions(-)
diff --git a/ethtool-copy.h b/ethtool-copy.h
index 1204076..92ab10d 100644
--- a/ethtool-copy.h
+++ b/ethtool-copy.h
@@ -89,10 +89,6 @@
* %ETHTOOL_GSET to get the current values before making specific
* changes and then applying them with %ETHTOOL_SSET.
*
- * Drivers that implement set_settings() should validate all fields
- * other than @cmd that are not described as read-only or deprecated,
- * and must ignore all fields described as read-only.
- *
* Deprecated fields should be ignored by both users and drivers.
*/
struct ethtool_cmd {
@@ -254,9 +250,17 @@ struct ethtool_tunable {
#define DOWNSHIFT_DEV_DEFAULT_COUNT 0xff
#define DOWNSHIFT_DEV_DISABLE 0
+/* Time in msecs after which link is reported as down
+ * 0 = lowest time supported by the PHY
+ * 0xff = off, link down detection according to standard
+ */
+#define ETHTOOL_PHY_FAST_LINK_DOWN_ON 0
+#define ETHTOOL_PHY_FAST_LINK_DOWN_OFF 0xff
+
enum phy_tunable_id {
ETHTOOL_PHY_ID_UNSPEC,
ETHTOOL_PHY_DOWNSHIFT,
+ ETHTOOL_PHY_FAST_LINK_DOWN,
/*
* Add your fresh new phy tunable attribute above and remember to update
* phy_tunable_strings[] in net/core/ethtool.c
@@ -884,7 +888,7 @@ struct ethtool_rx_flow_spec {
__u32 location;
};
-/* How rings are layed out when accessing virtual functions or
+/* How rings are laid out when accessing virtual functions or
* offloaded queues is device specific. To allow users to do flow
* steering and specify these queues the ring cookie is partitioned
* into a 32bit queue index with an 8 bit virtual function id.
@@ -893,7 +897,7 @@ struct ethtool_rx_flow_spec {
* devices start supporting PCIe w/ARI. However at the moment I
* do not know of any devices that support this so I do not reserve
* space for this at this time. If a future patch consumes the next
- * byte it should be aware of this possiblity.
+ * byte it should be aware of this possibility.
*/
#define ETHTOOL_RX_FLOW_SPEC_RING 0x00000000FFFFFFFFLL
#define ETHTOOL_RX_FLOW_SPEC_RING_VF 0x000000FF00000000LL
@@ -1434,6 +1438,13 @@ enum ethtool_link_mode_bit_indices {
ETHTOOL_LINK_MODE_56000baseSR4_Full_BIT = 29,
ETHTOOL_LINK_MODE_56000baseLR4_Full_BIT = 30,
ETHTOOL_LINK_MODE_25000baseCR_Full_BIT = 31,
+
+ /* Last allowed bit for __ETHTOOL_LINK_MODE_LEGACY_MASK is bit
+ * 31. Please do NOT define any SUPPORTED_* or ADVERTISED_*
+ * macro for bits > 31. The only way to use indices > 31 is to
+ * use the new ETHTOOL_GLINKSETTINGS/ETHTOOL_SLINKSETTINGS API.
+ */
+
ETHTOOL_LINK_MODE_25000baseKR_Full_BIT = 32,
ETHTOOL_LINK_MODE_25000baseSR_Full_BIT = 33,
ETHTOOL_LINK_MODE_50000baseCR2_Full_BIT = 34,
@@ -1471,14 +1482,8 @@ enum ethtool_link_mode_bit_indices {
ETHTOOL_LINK_MODE_200000baseDR4_Full_BIT = 65,
ETHTOOL_LINK_MODE_200000baseCR4_Full_BIT = 66,
- /* Last allowed bit for __ETHTOOL_LINK_MODE_LEGACY_MASK is bit
- * 31. Please do NOT define any SUPPORTED_* or ADVERTISED_*
- * macro for bits > 31. The only way to use indices > 31 is to
- * use the new ETHTOOL_GLINKSETTINGS/ETHTOOL_SLINKSETTINGS API.
- */
-
- __ETHTOOL_LINK_MODE_LAST
- = ETHTOOL_LINK_MODE_200000baseCR4_Full_BIT,
+ /* must be last entry */
+ __ETHTOOL_LINK_MODE_MASK_NBITS
};
#define __ETHTOOL_LINK_MODE_LEGACY_MASK(base_name) \
@@ -1814,14 +1819,9 @@ enum ethtool_reset_flags {
* rejected.
*
* Deprecated %ethtool_cmd fields transceiver, maxtxpkt and maxrxpkt
- * are not available in %ethtool_link_settings. Until all drivers are
- * converted to ignore them or to the new %ethtool_link_settings API,
- * for both queries and changes, users should always try
- * %ETHTOOL_GLINKSETTINGS first, and if it fails with -ENOTSUPP stick
- * only to %ETHTOOL_GSET and %ETHTOOL_SSET consistently. If it
- * succeeds, then users should stick to %ETHTOOL_GLINKSETTINGS and
- * %ETHTOOL_SLINKSETTINGS (which would support drivers implementing
- * either %ethtool_cmd or %ethtool_link_settings).
+ * are not available in %ethtool_link_settings. These fields will be
+ * always set to zero in %ETHTOOL_GSET reply and %ETHTOOL_SSET will
+ * fail if any of them is set to non-zero value.
*
* Users should assume that all fields not marked read-only are
* writable and subject to validation by the driver. They should use
--
2.21.0
