This patch removes the eeprom_93cx6 files from rt2x00
and makes sure rt2x00 will use the generic eeprom_93cx6
implementation inside the lib folder.
Signed-off-by Ivo van Doorn <[EMAIL PROTECTED]>
---
diff -rNU3 wireless-dev/drivers/net/wireless/d80211/rt2x00/Kconfig
wireless-dev_eeprom/drivers/net/wireless/d80211/rt2x00/Kconfig
--- wireless-dev/drivers/net/wireless/d80211/rt2x00/Kconfig 2007-01-03
20:53:57.000000000 +0100
+++ wireless-dev_eeprom/drivers/net/wireless/d80211/rt2x00/Kconfig
2007-01-03 21:02:41.000000000 +0100
@@ -82,15 +82,6 @@
---help---
Enable debugging output.
-config EEPROM_93CX6
- tristate "EEPROM 93CX6 support"
- depends on RT2x00
- ---help---
- This is an experimental driver for EEPROM chipsets 93c46 and 93c66.
- These chipsets are found inside the Ralink wireless cards.
-
- When compiled as a module, this driver will be called "eeprom_93c6.ko".
-
config CRC_ITU_T
tristate "CRC ITU-T V.41 functions"
help
diff -rNU3 wireless-dev/drivers/net/wireless/d80211/rt2x00/Makefile
wireless-dev_eeprom/drivers/net/wireless/d80211/rt2x00/Makefile
--- wireless-dev/drivers/net/wireless/d80211/rt2x00/Makefile 2007-01-03
20:53:57.000000000 +0100
+++ wireless-dev_eeprom/drivers/net/wireless/d80211/rt2x00/Makefile
2007-01-03 21:08:49.000000000 +0100
@@ -4,4 +4,3 @@
obj-$(CONFIG_RT2500USB) += rt2500usb.o
obj-$(CONFIG_RT73USB) += rt73usb.o
obj-$(CONFIG_CRC_ITU_T) += crc-itu-t.o
-obj-$(CONFIG_EEPROM_93CX6) += eeprom_93cx6.o
diff -rNU3 wireless-dev/drivers/net/wireless/d80211/rt2x00/eeprom_93cx6.c
wireless-dev_eeprom/drivers/net/wireless/d80211/rt2x00/eeprom_93cx6.c
--- wireless-dev/drivers/net/wireless/d80211/rt2x00/eeprom_93cx6.c
2007-01-03 20:53:57.000000000 +0100
+++ wireless-dev_eeprom/drivers/net/wireless/d80211/rt2x00/eeprom_93cx6.c
1970-01-01 01:00:00.000000000 +0100
@@ -1,189 +0,0 @@
-/*
- Copyright (C) 2004 - 2006 rt2x00 SourceForge Project
- <http://rt2x00.serialmonkey.com>
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the
- Free Software Foundation, Inc.,
- 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- */
-
-/*
- Module: eeprom_93cx6
- Abstract: EEPROM reader routines for 93cx6 chipsets.
- Supported chipsets: 93c46 & 93c66.
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/version.h>
-#include <linux/delay.h>
-
-#include "eeprom_93cx6.h"
-
-MODULE_AUTHOR("http://rt2x00.serialmonkey.com";);
-MODULE_DESCRIPTION("EEPROM 93cx6 chip driver");
-MODULE_LICENSE("GPL");
-
-static inline void eeprom_93cx6_pulse_high(struct eeprom_93cx6 *eeprom)
-{
- eeprom->reg_data_clock = 1;
- eeprom->register_write(eeprom);
- udelay(1);
-}
-
-static inline void eeprom_93cx6_pulse_low(struct eeprom_93cx6 *eeprom)
-{
- eeprom->reg_data_clock = 0;
- eeprom->register_write(eeprom);
- udelay(1);
-}
-
-static void eeprom_93cx6_write_bits(struct eeprom_93cx6 *eeprom,
- const u16 data, const u16 count)
-{
- unsigned int i;
-
- eeprom->register_read(eeprom);
-
- /*
- * Clear data flags.
- */
- eeprom->reg_data_in = 0;
- eeprom->reg_data_out = 0;
-
- /*
- * Start writing all bits.
- */
- for (i = count; i > 0; i--) {
- /*
- * Check if this bit needs to be set.
- */
- eeprom->reg_data_in = !!(data & (1 << (i - 1)));
-
- /*
- * Write the bit to the eeprom register.
- */
- eeprom->register_write(eeprom);
-
- /*
- * Kick a pulse.
- */
- eeprom_93cx6_pulse_high(eeprom);
- eeprom_93cx6_pulse_low(eeprom);
- }
-
- eeprom->reg_data_in = 0;
- eeprom->register_write(eeprom);
-}
-
-static void eeprom_93cx6_read_bits(struct eeprom_93cx6 *eeprom,
- u16 *data, const u16 count)
-{
- unsigned int i;
-
- eeprom->register_read(eeprom);
-
- /*
- * Clear data flags.
- */
- eeprom->reg_data_in = 0;
- eeprom->reg_data_out = 0;
-
- /*
- * Start reading all bits.
- */
- for (i = count; i > 0; i--) {
- eeprom_93cx6_pulse_high(eeprom);
-
- eeprom->register_read(eeprom);
-
- /*
- * Clear data_in flag.
- */
- eeprom->reg_data_in = 0;
-
- /*
- * Read if the bit has been set.
- */
- if (eeprom->reg_data_out)
- *data |= (1 << (i - 1));
-
- eeprom_93cx6_pulse_low(eeprom);
- }
-}
-
-void eeprom_93cx6_read(struct eeprom_93cx6 *eeprom, const u8 word,
- __le16 *data)
-{
- u16 buffer = 0;
-
- /*
- * Clear all flags, and enable chip select.
- */
- eeprom->register_read(eeprom);
- eeprom->reg_data_in = 0;
- eeprom->reg_data_out = 0;
- eeprom->reg_data_clock = 0;
- eeprom->reg_chip_select = 1;
- eeprom->register_write(eeprom);
-
- /*
- * kick a pulse.
- */
- eeprom_93cx6_pulse_high(eeprom);
- eeprom_93cx6_pulse_low(eeprom);
-
- /*
- * Select the read opcode and the word to be read.
- */
- eeprom_93cx6_write_bits(eeprom, PCI_EEPROM_READ_OPCODE, 3);
- eeprom_93cx6_write_bits(eeprom, word, eeprom->width);
-
- /*
- * Read the requested 16 bits.
- */
- eeprom_93cx6_read_bits(eeprom, &buffer, 16);
-
- /*
- * Clear chip_select and data_in flags.
- */
- eeprom->register_read(eeprom);
- eeprom->reg_data_in = 0;
- eeprom->reg_chip_select = 0;
- eeprom->register_write(eeprom);
-
- /*
- * kick a pulse.
- */
- eeprom_93cx6_pulse_high(eeprom);
- eeprom_93cx6_pulse_low(eeprom);
-
- /*
- * The data from the eeprom is stored as little endian,
- * so we don't need to byteorder. To prevent sparse from
- * complaining we need to force the type to __le16.
- */
- *data = (__force __le16)buffer;
-}
-EXPORT_SYMBOL_GPL(eeprom_93cx6_read);
-
-void eeprom_93cx6_multiread(struct eeprom_93cx6 *eeprom, const u8 word,
- __le16 *data, const u16 words)
-{
- unsigned int i;
-
- for (i = 0; i < words; i++)
- eeprom_93cx6_read(eeprom, word + i, data++);
-}
-EXPORT_SYMBOL_GPL(eeprom_93cx6_multiread);
diff -rNU3 wireless-dev/drivers/net/wireless/d80211/rt2x00/eeprom_93cx6.h
wireless-dev_eeprom/drivers/net/wireless/d80211/rt2x00/eeprom_93cx6.h
--- wireless-dev/drivers/net/wireless/d80211/rt2x00/eeprom_93cx6.h
2007-01-03 20:53:57.000000000 +0100
+++ wireless-dev_eeprom/drivers/net/wireless/d80211/rt2x00/eeprom_93cx6.h
1970-01-01 01:00:00.000000000 +0100
@@ -1,90 +0,0 @@
-/*
- Copyright (C) 2004 - 2006 rt2x00 SourceForge Project
- <http://rt2x00.serialmonkey.com>
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the
- Free Software Foundation, Inc.,
- 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- */
-
-/*
- Module: eeprom_93cx6
- Abstract: EEPROM reader datastructures for 93cx6 chipsets.
- Supported chipsets: 93c46 & 93c66.
- */
-
-/*
- * EEPROM operation defines.
- */
-#define PCI_EEPROM_WIDTH_93C46 6
-#define PCI_EEPROM_WIDTH_93C66 8
-#define PCI_EEPROM_WRITE_OPCODE 0x05
-#define PCI_EEPROM_READ_OPCODE 0x06
-
-/**
- * struct eeprom_93cx6 - control structure for setting the commands
- * for reading the eeprom data.
- *
- * @data: private pointer for the driver.
- * @register_read(struct eeprom_93cx6 *eeprom): handler to
- * read the eeprom register, this function should set all reg_* fields.
- * @register_write(struct eeprom_93cx6 *eeprom): handler to
- * write to the eeprom register by using all reg_* fields.
- * @width: eeprom width, should be one of the PCI_EEPROM_WIDTH_* defines
- * @reg_data_in: register field to indicate data input
- * @reg_data_out: register field to indicate data output
- * @reg_data_clock: register field to set the data clock
- * @reg_chip_select: register field to set the chip select
- *
- * This structure is used for the communication between the driver
- * and the eeprom_93cx6 handlers for reading the eeprom.
- */
-struct eeprom_93cx6 {
- void *data;
-
- void (*register_read)(struct eeprom_93cx6 *eeprom);
- void (*register_write)(struct eeprom_93cx6 *eeprom);
-
- int width;
-
- char reg_data_in;
- char reg_data_out;
- char reg_data_clock;
- char reg_chip_select;
-};
-
-/**
- * eeprom_93cx6_read - Read multiple words from eeprom
- * @eeprom: Pointer to eeprom structure
- * @word: Word index from where we should start reading
- * @data: target pointer where the information will have to be stored
- *
- * This function will read the eeprom data as little endian word
- * into the given data pointer.
- */
-extern void eeprom_93cx6_read(struct eeprom_93cx6 *eeprom,
- const u8 word, __le16 *data);
-
-/**
- * eeprom_93cx6_multiread - Read multiple words from eeprom
- * @eeprom: Pointer to eeprom structure
- * @word: Word index from where we should start reading
- * @data: target pointer where the information will have to be stored
- * @words: Number of words that should be read.
- *
- * This function will read all requested words from the eeprom,
- * this is done by calling eeprom_93cx6_read() multiple times.
- */
-extern void eeprom_93cx6_multiread(struct eeprom_93cx6 *eeprom,
- const u8 word, __le16 *data, const u16 words);
diff -rNU3 wireless-dev/drivers/net/wireless/d80211/rt2x00/rt2400pci.c
wireless-dev_eeprom/drivers/net/wireless/d80211/rt2x00/rt2400pci.c
--- wireless-dev/drivers/net/wireless/d80211/rt2x00/rt2400pci.c 2007-01-03
20:53:57.000000000 +0100
+++ wireless-dev_eeprom/drivers/net/wireless/d80211/rt2x00/rt2400pci.c
2007-01-03 21:03:30.000000000 +0100
@@ -35,6 +35,7 @@
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/wireless.h>
+#include <linux/eeprom_93cx6.h>
#include <net/iw_handler.h>
#include <net/d80211.h>
@@ -53,7 +54,6 @@
#include "rt2x00.h"
#include "rt2x00pci.h"
#include "rt2400pci.h"
-#include "eeprom_93cx6.h"
/*
* Register access.
diff -rNU3 wireless-dev/drivers/net/wireless/d80211/rt2x00/rt2500pci.c
wireless-dev_eeprom/drivers/net/wireless/d80211/rt2x00/rt2500pci.c
--- wireless-dev/drivers/net/wireless/d80211/rt2x00/rt2500pci.c 2007-01-03
20:53:57.000000000 +0100
+++ wireless-dev_eeprom/drivers/net/wireless/d80211/rt2x00/rt2500pci.c
2007-01-03 21:03:28.000000000 +0100
@@ -35,6 +35,7 @@
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/wireless.h>
+#include <linux/eeprom_93cx6.h>
#include <net/iw_handler.h>
#include <net/d80211.h>
@@ -53,7 +54,6 @@
#include "rt2x00.h"
#include "rt2x00pci.h"
#include "rt2500pci.h"
-#include "eeprom_93cx6.h"
/*
* Register access.
diff -rNU3 wireless-dev/drivers/net/wireless/d80211/rt2x00/rt61pci.c
wireless-dev_eeprom/drivers/net/wireless/d80211/rt2x00/rt61pci.c
--- wireless-dev/drivers/net/wireless/d80211/rt2x00/rt61pci.c 2007-01-03
20:53:57.000000000 +0100
+++ wireless-dev_eeprom/drivers/net/wireless/d80211/rt2x00/rt61pci.c
2007-01-03 21:03:29.000000000 +0100
@@ -35,6 +35,7 @@
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/wireless.h>
+#include <linux/eeprom_93cx6.h>
#include <linux/firmware.h>
#include <net/iw_handler.h>
@@ -55,7 +56,6 @@
#include "rt2x00pci.h"
#include "rt61pci.h"
#include "crc-itu-t.h"
-#include "eeprom_93cx6.h"
/*
* Register access.
-
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
