Hi,
Another issue in a row with networking on imx6dl-yapp4 platform [1]
that uses QCA8334 Ethernet switch.
Very recently, with Vinod and Andrew, we solved an issue with
RGMII_ID mode by patch[2][3]. I tested those with next-20190215
and it worked just fine.
The patch[2] was merged into next-20190220 so I tested the latest version.
Now the cpu port does not work again. I tracked it down to this commit
5502b218e001 ("net: phy: use phy_resolve_aneg_linkmode in
genphy_read_status") [4]
If I revert the offending commit, cpu port works fine. I suspect the
problem is on the qca8k driver side but I am not really sure.
AFAICT autonegotiation is not available on the QCA833x cpu port (MAC0).
Any ideas what may be the root cause of the problem?
Thank you,
Michal
[1]
https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/?id=87489ec3a77f3e01bcf0d46e353ae7112ec8c4f0
[2]
https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/?id=a968b5e9d5879f9535d6099505f9e14abcafb623
[3] https://lore.kernel.org/patchwork/patch/1043817/
[4]
https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/?id=5502b218e001
