Hi Vinod,
On 19/02/2019 8.17, Vinod Koul wrote:
> Peter[1] reported that patch cd28d1d6e52e: ("net: phy: at803x: Disable
> phy delay for RGMII mode") caused regression on am335x-evmsk board.
> This board expects the Phy delay to be enabled but specified RGMII mode
> which refers to delays being disabled. So fix this by disabling delay only
> for RGMII mode and enable for RGMII_ID and RGMII_TXID/RXID modes.
>
> While at it, as pointed by Dave, don't inline the helpers.
>
> [1]: https://www.spinics.net/lists/netdev/msg550749.html
Not sure what was changed since v2, but with
https://patchwork.ozlabs.org/project/netdev/list/?series=92672
ethernet is working on am335x-evmsk. thank you:
Tested-by: Peter Ujfalusi <peter.ujfla...@ti.com>
> Vinod Koul (2):
> net: phy: at803x: don't inline helpers
> net: phy: at803x: disable delay only for RGMII mode
>
> drivers/net/phy/at803x.c | 51 ++++++++++++++++++++++++++++++----------
> 1 file changed, 38 insertions(+), 13 deletions(-)
>
- Péter
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
