[PATCH 1/2] ARM: dts: am335x-evmsk: Fix PHY mode for ethernet

[Peter Ujfalusi]

The PHY must add both tx and rx delay and not only on the tx clock.
The board uses AR8031_AL1A PHY where the rx delay is enabled by default,
the tx dealy is disabled.

The reason why rgmii-txid worked because the rx delay was not disabled by
the driver so essentially we ended up with rgmii-id PHY mode.

Signed-off-by: Peter Ujfalusi <peter.ujfal...@ti.com>
---
 arch/arm/boot/dts/am335x-evmsk.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/am335x-evmsk.dts 
b/arch/arm/boot/dts/am335x-evmsk.dts
index 172c0224e7f6..b128998097ce 100644
--- a/arch/arm/boot/dts/am335x-evmsk.dts
+++ b/arch/arm/boot/dts/am335x-evmsk.dts
@@ -651,13 +651,13 @@
 
 &cpsw_emac0 {
        phy-handle = <&ethphy0>;
-       phy-mode = "rgmii-txid";
+       phy-mode = "rgmii-id";
        dual_emac_res_vlan = <1>;
 };
 
 &cpsw_emac1 {
        phy-handle = <&ethphy1>;
-       phy-mode = "rgmii-txid";
+       phy-mode = "rgmii-id";
        dual_emac_res_vlan = <2>;
 };
 
-- 
Peter

Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki