Kindly Ping... Best Regards, Joakim Zhang
> -----Original Message----- > From: Joakim Zhang > Sent: 2019年1月17日 14:28 > To: m...@pengutronix.de; linux-...@vger.kernel.org > Cc: w...@grandegger.com; netdev@vger.kernel.org; > linux-ker...@vger.kernel.org; dl-linux-imx <linux-...@nxp.com> > Subject: RE: [PATCH 0/3] can: flexcan: add imx8qm support > > > Kindly Ping... > > Best Regards, > Joakim Zhang > > > -----Original Message----- > > From: Joakim Zhang > > Sent: 2018年12月19日 16:39 > > To: m...@pengutronix.de; linux-...@vger.kernel.org > > Cc: w...@grandegger.com; netdev@vger.kernel.org; > > linux-ker...@vger.kernel.org; dl-linux-imx <linux-...@nxp.com>; Joakim > > Zhang <qiangqing.zh...@nxp.com> > > Subject: [PATCH 0/3] can: flexcan: add imx8qm support > > > > This patch set intends to add Flexcan support for i.MX8QM platform > > which defaultly supports CAN FD protocol. Although BRS enabled by > > system reset when the driver sets CAN FD mode, now this patch serial > > does not support BRS in the driver. And then I will send patch to > > enable BRS by changing the register to set bit timing. > > > > Dong Aisheng (3): > > can: rx-offload: add CANFD support based on offload > > can: flexcan: add CAN FD mode support > > can: flexcan: add imx8qm support > > > > drivers/net/can/flexcan.c | 114 > ++++++++++++++++++++++++++++++--- > > drivers/net/can/rx-offload.c | 16 +++-- > > include/linux/can/rx-offload.h | 4 +- > > 3 files changed, 117 insertions(+), 17 deletions(-) > > > > -- > > 2.17.1
