On Wed, Nov 29, 2006 at 08:29:48AM +0300, Evgeniy Polyakov ([EMAIL PROTECTED])
wrote:
> > > > > > > > > > Here is link to discussion:
> > > > > > > > > > http://marc.theaimsgroup.com/?l=linux-netdev&m=116227512815783&w=2
> > > > > > > > > >
> > > > > > > > >
> > > > > > > > > can you try the linux-image 2.6.18, they are in unstable
> > > > > > > > > and the etch release images.
> > > > >
> > > > > 2.6.18-1-686 kernel still allows to freeze sky2.
> > > >
> > > > Fix didn't go in until 2.6.18.2
> > >
> > > fix is in the 2.6.18-2-686 linux image, you'd better update
> > > your test box.
> >
> > Just for clarification: there are at least two bugs described - one in
> > the above link, and this new one. The former could only be fixed by
> > reboot, the latter - by rmmod/modprobe sequence. The former had special
> > info in dmesg, the latter does not.
> >
> > Hopefully they both are fixed in 2.6.18-2.
> > I will set it up as soon as time permits (it is my main desktop, which
> > is rarely turned off) and report if problem still persists.
>
> Bug still exists in 2.6.18-2 (package version 5).
> Can be 'fixed' by rmmod/modprobe sequence though.
> Is not easily reproducible.
Bug with freeze also exists in 2.6.18-3 (package version 2.6.18-7) - no
messages in dmesg, no interrupts.
It is dual lan board with only one port being used.
rmmod/modprobe sequence brings NIC back to working mode.
--
Evgeniy Polyakov
-
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
