From: Andrew Lunn <and...@lunn.ch>
By using an external PHY, ports 9 and 10 can support 2500BaseT.
So set this link mode in the mask when validating.
Signed-off-by: Andrew Lunn <and...@lunn.ch>
Signed-off-by: Heiner Kallweit <hkallwe...@gmail.com>
---
drivers/net/dsa/mv88e6xxx/chip.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c
index 8dca2c949..739c0c168 100644
--- a/drivers/net/dsa/mv88e6xxx/chip.c
+++ b/drivers/net/dsa/mv88e6xxx/chip.c
@@ -647,8 +647,10 @@ static void mv88e6390_phylink_validate(struct
mv88e6xxx_chip *chip, int port,
unsigned long *mask,
struct phylink_link_state *state)
{
- if (port >= 9)
+ if (port >= 9) {
phylink_set(mask, 2500baseX_Full);
+ phylink_set(mask, 2500baseT_Full);
+ }
/* No ethtool bits for 200Mbps */
phylink_set(mask, 1000baseT_Full);
--
2.20.1
