Hi Andrew,
thanks for your feedback.
On Wed, Feb 06, 2019 at 10:53:22PM +0100, Andrew Lunn wrote:
> On Wed, Feb 06, 2019 at 12:51:06PM -0800, Moritz Fischer wrote:
> > Move the DT based link GPIO parsing to of_mdio and let the places
> > that register a fixed_phy pass in a GPIO descriptor or NULL.
> >
> > This allows fixed_phy on non-DT platforms to have link GPIOs, too.
> >
> > Signed-off-by: Moritz Fischer <m...@kernel.org>
> > ---
> > drivers/net/dsa/dsa_loop.c | 2 +-
> > drivers/net/ethernet/broadcom/bgmac.c | 2 +-
> > drivers/net/ethernet/broadcom/genet/bcmmii.c | 2 +-
> > drivers/net/phy/fixed_phy.c | 48 ++------------------
> > drivers/net/usb/lan78xx.c | 2 +-
> > drivers/of/of_mdio.c | 15 +++++-
> > include/linux/phy_fixed.h | 3 +-
> > 7 files changed, 23 insertions(+), 51 deletions(-)
> >
> > diff --git a/drivers/net/dsa/dsa_loop.c b/drivers/net/dsa/dsa_loop.c
> > index 17482ae09aa5..7f124c620092 100644
> > --- a/drivers/net/dsa/dsa_loop.c
> > +++ b/drivers/net/dsa/dsa_loop.c
> > @@ -343,7 +343,7 @@ static int __init dsa_loop_init(void)
> > unsigned int i;
> >
> > for (i = 0; i < NUM_FIXED_PHYS; i++)
> > - phydevs[i] = fixed_phy_register(PHY_POLL, &status, NULL);
> > + phydevs[i] = fixed_phy_register(PHY_POLL, &status, NULL, NULL);
> >
> > return mdio_driver_register(&dsa_loop_drv);
> > }
> > diff --git a/drivers/net/ethernet/broadcom/bgmac.c
> > b/drivers/net/ethernet/broadcom/bgmac.c
> > index 4632dd5dbad1..bce644dec5c2 100644
> > --- a/drivers/net/ethernet/broadcom/bgmac.c
> > +++ b/drivers/net/ethernet/broadcom/bgmac.c
> > @@ -1446,7 +1446,7 @@ int bgmac_phy_connect_direct(struct bgmac *bgmac)
> > struct phy_device *phy_dev;
> > int err;
> >
> > - phy_dev = fixed_phy_register(PHY_POLL, &fphy_status, NULL);
> > + phy_dev = fixed_phy_register(PHY_POLL, &fphy_status, NULL, NULL);
> > if (!phy_dev || IS_ERR(phy_dev)) {
> > dev_err(bgmac->dev, "Failed to register fixed PHY device\n");
> > return -ENODEV;
> > diff --git a/drivers/net/ethernet/broadcom/genet/bcmmii.c
> > b/drivers/net/ethernet/broadcom/genet/bcmmii.c
> > index 51880d83131a..7cbd737aba80 100644
> > --- a/drivers/net/ethernet/broadcom/genet/bcmmii.c
> > +++ b/drivers/net/ethernet/broadcom/genet/bcmmii.c
> > @@ -525,7 +525,7 @@ static int bcmgenet_mii_pd_init(struct bcmgenet_priv
> > *priv)
> > .asym_pause = 0,
> > };
> >
> > - phydev = fixed_phy_register(PHY_POLL, &fphy_status, NULL);
> > + phydev = fixed_phy_register(PHY_POLL, &fphy_status, NULL, NULL);
> > if (!phydev || IS_ERR(phydev)) {
> > dev_err(kdev, "failed to register fixed PHY device\n");
> > return -ENODEV;
> > diff --git a/drivers/net/phy/fixed_phy.c b/drivers/net/phy/fixed_phy.c
> > index d810f914aaa4..845bd7c2065a 100644
> > --- a/drivers/net/phy/fixed_phy.c
> > +++ b/drivers/net/phy/fixed_phy.c
> > @@ -18,6 +18,7 @@
> > #include <linux/err.h>
> > #include <linux/slab.h>
> > #include <linux/of.h>
> > +#include <linux/of_mdio.h>
> > #include <linux/gpio/consumer.h>
> > #include <linux/seqlock.h>
> > #include <linux/idr.h>
> > @@ -191,50 +192,12 @@ static void fixed_phy_del(int phy_addr)
> > }
> > }
> >
> > -#ifdef CONFIG_OF_GPIO
> > -static struct gpio_desc *fixed_phy_get_gpiod(struct device_node *np)
> > -{
> > - struct device_node *fixed_link_node;
> > - struct gpio_desc *gpiod;
> > -
> > - if (!np)
> > - return NULL;
> > -
> > - fixed_link_node = of_get_child_by_name(np, "fixed-link");
> > - if (!fixed_link_node)
> > - return NULL;
> > -
> > - /*
> > - * As the fixed link is just a device tree node without any
> > - * Linux device associated with it, we simply have obtain
> > - * the GPIO descriptor from the device tree like this.
> > - */
> > - gpiod = gpiod_get_from_of_node(fixed_link_node, "link-gpios", 0,
> > - GPIOD_IN, "mdio");
> > - of_node_put(fixed_link_node);
> > - if (IS_ERR(gpiod)) {
> > - if (PTR_ERR(gpiod) == -EPROBE_DEFER)
> > - return gpiod;
> > - pr_err("error getting GPIO for fixed link %pOF, proceed
> > without\n",
> > - fixed_link_node);
> > - gpiod = NULL;
> > - }
> > -
> > - return gpiod;
> > -}
> > -#else
> > -static struct gpio_desc *fixed_phy_get_gpiod(struct device_node *np)
> > -{
> > - return NULL;
> > -}
> > -#endif
> > -
> > struct phy_device *fixed_phy_register(unsigned int irq,
> > struct fixed_phy_status *status,
> > - struct device_node *np)
> > + struct device_node *np,
> > + struct gpio_desc *gpiod)
> > {
> > struct fixed_mdio_bus *fmb = &platform_fmb;
> > - struct gpio_desc *gpiod = NULL;
> > struct phy_device *phy;
> > int phy_addr;
> > int ret;
> > @@ -242,11 +205,6 @@ struct phy_device *fixed_phy_register(unsigned int irq,
> > if (!fmb->mii_bus || fmb->mii_bus->state != MDIOBUS_REGISTERED)
> > return ERR_PTR(-EPROBE_DEFER);
> >
> > - /* Check if we have a GPIO associated with this fixed phy */
> > - gpiod = fixed_phy_get_gpiod(np);
> > - if (IS_ERR(gpiod))
> > - return ERR_CAST(gpiod);
> > -
> > /* Get the next available PHY address, up to PHY_MAX_ADDR */
> > phy_addr = ida_simple_get(&phy_fixed_ida, 0, PHY_MAX_ADDR, GFP_KERNEL);
> > if (phy_addr < 0)
> > diff --git a/drivers/net/usb/lan78xx.c b/drivers/net/usb/lan78xx.c
> > index 3d92ea6fcc02..bd88f0aef2fa 100644
> > --- a/drivers/net/usb/lan78xx.c
> > +++ b/drivers/net/usb/lan78xx.c
> > @@ -2051,7 +2051,7 @@ static struct phy_device *lan7801_phy_init(struct
> > lan78xx_net *dev)
> > phydev = phy_find_first(dev->mdiobus);
> > if (!phydev) {
> > netdev_dbg(dev->net, "PHY Not Found!! Registering Fixed PHY\n");
> > - phydev = fixed_phy_register(PHY_POLL, &fphy_status, NULL);
> > + phydev = fixed_phy_register(PHY_POLL, &fphy_status, NULL, NULL);
> > if (IS_ERR(phydev)) {
> > netdev_err(dev->net, "No PHY/fixed_PHY found\n");
> > return NULL;
> > diff --git a/drivers/of/of_mdio.c b/drivers/of/of_mdio.c
> > index de6157357e26..6be2120b5f03 100644
> > --- a/drivers/of/of_mdio.c
> > +++ b/drivers/of/of_mdio.c
> > @@ -20,6 +20,7 @@
> > #include <linux/of_mdio.h>
> > #include <linux/of_net.h>
> > #include <linux/module.h>
> > +#include <linux/gpio/consumer.h>
> >
> > #define DEFAULT_GPIO_RESET_DELAY 10 /* in microseconds */
> >
> > @@ -460,6 +461,7 @@ int of_phy_register_fixed_link(struct device_node *np)
> > {
> > struct fixed_phy_status status = {};
> > struct device_node *fixed_link_node;
> > + struct gpio_desc *gpiod = NULL;
> > u32 fixed_link_prop[5];
> > const char *managed;
> >
> > @@ -483,7 +485,17 @@ int of_phy_register_fixed_link(struct device_node *np)
> > status.pause = of_property_read_bool(fixed_link_node, "pause");
> > status.asym_pause = of_property_read_bool(fixed_link_node,
> > "asym-pause");
> > +
> > + gpiod = gpiod_get_from_of_node(fixed_link_node, "link-gpios", 0,
> > + GPIOD_IN, "mdio");
> > of_node_put(fixed_link_node);
> > + if (IS_ERR(gpiod)) {
> > + if (PTR_ERR(gpiod) == -EPROBE_DEFER)
> > + return PTR_ERR(gpiod);
> > + pr_err("error getting GPIO for fixed link %pOF, proceed
> > without\n",
> > + fixed_link_node);
> > + gpiod = NULL;
> > extern struct phy_device *fixed_phy_register(unsigned int irq,
> > struct fixed_phy_status *status,
> > - struct device_node *np);
> > + struct device_node *np,
> > + struct gpio_desc *gpiod);
>
> Hi Moritz
>
> I think it would be better to add a
>
> extern struct phy_device *fixed_phy_register_gpiod(unsigned int irq,
> struct fixed_phy_status *status,
> struct gpio_desc *gpiod);
>
> If you are not using DT, the np is pointless. So lets keep the API
> simple.
To clarify: Do you agree with moving the parsing to of_mdio, or do you
want to keep the parsing as it was and just add an additional function.
In the latter case you'd have a
static struct phy_device *__fixed_phy_register(unsigned int irq,
struct fixed_phy_status *status,
struct device_node *np,
struct gpio_desc *gpiod)
{
if (gpiod)
use that
else
old behavior / scan dt?
}
That we then call from fixed_phy_register_gpiod() with a np of NULL,
and from fixed_phy_register() with a gpiod of NULL?
Thanks,
Moritz
