On Tue, Jan 29, 2019 at 04:55:36PM -0800, Florian Fainelli wrote: > Hi all, > > This patch series does a number of things in order to enable management > mode for bcm_sf2 (which could be easily extended to b53 with proper > testing later on). In order to get there, there were several use cases > that did not work correctly and that needed to be fixed: > > - VLAN devices on top of switch ports not being member of a bridge, with > other switch ports being bridged, with the bridge having VLAN > filtering enabled. > > - lack of multicast filtering by default on network ports which should > be happening in order for the non-bridged DSA ports to behave strictly > as Ethernet NICs with proper filering. This is accomplished by hooking > a ndo_set_rx_mode() function to the DSA slave network devices > > - when VLAN filtering is globally enabled on the switch (because at > least a bridge device requires it), then we also need to make sure > that when doing multicast over VLAN devices over a switch port > (bridged or not) happens with the correct MDB address *and* VID > > Hopefully the changes to net/8021q and net/bridge are deemed acceptable.
You're not touching net/8021q :) Probably leftover from v1 ... > > drivers/net/dsa/b53/b53_common.c | 257 +++++++++++++++++++-- > drivers/net/dsa/b53/b53_priv.h | 14 +- > drivers/net/dsa/b53/b53_regs.h | 22 ++ > drivers/net/dsa/bcm_sf2.c | 56 +++-- > drivers/net/dsa/bcm_sf2_regs.h | 5 + > drivers/net/ethernet/broadcom/bcmsysport.c | 4 + > include/net/dsa.h | 2 + > net/bridge/br_multicast.c | 23 +- > net/dsa/dsa_priv.h | 22 +- > net/dsa/port.c | 42 +++- > net/dsa/slave.c | 107 ++++++++- > net/dsa/switch.c | 57 +++++ > 12 files changed, 552 insertions(+), 59 deletions(-) > > -- > 2.17.1 >
