Define all necessary registers in order to implement IGMP snooping later on, which are mostly comprised of the high-level protocol register control definitions.
Signed-off-by: Florian Fainelli <f.faine...@gmail.com> --- drivers/net/dsa/b53/b53_regs.h | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) diff --git a/drivers/net/dsa/b53/b53_regs.h b/drivers/net/dsa/b53/b53_regs.h index 2a9f421680aa..b4aecd4552b6 100644 --- a/drivers/net/dsa/b53/b53_regs.h +++ b/drivers/net/dsa/b53/b53_regs.h @@ -115,6 +115,8 @@ #define B53_UC_FLOOD_MASK 0x32 #define B53_MC_FLOOD_MASK 0x34 #define B53_IPMC_FLOOD_MASK 0x36 +#define B53_DIS_LEARN 0x3c +#define B53_SFT_LRN_CTRL 0x3e /* * Override Ports 0-7 State on devices with xMII interfaces (8 bit) @@ -253,6 +255,26 @@ /* Revision ID register (8 bit) */ #define B53_REV_ID 0x40 +/* High-level Protocol Control Register (32 bit) */ +#define B53_HL_PRTC_CTRL 0x50 +#define HL_PRTC_ARP_EN (1 << 0) +#define HL_PRTC_RARP_EN (1 << 1) +#define HL_PRTC_DHCP_EN (1 << 2) +#define HL_PRTC_ICMPV4_EN (1 << 3) +#define HL_PRTC_ICMPV6_EN (1 << 4) +#define HL_PRTC_ICMPV6_FWD_MODE (1 << 5) +#define HL_PRTC_IGMP_DIP_EN (1 << 8) +#define HL_PRTC_IGMP_RPTLVE_EN (1 << 9) +#define HL_PRTC_IGMP_RPTVLE_FWD_MODE (1 << 10) +#define HL_PRTC_IGMP_QRY_EN (1 << 11) +#define HL_PRTC_IGMP_QRY_FWD_MODE (1 << 12) +#define HL_PRTC_IGMP_UKN_EN (1 << 13) +#define HL_PRTC_IGMP_UKN_FWD_MODE (1 << 14) +#define HL_PRTC_MLD_RPTDONE_EN (1 << 15) +#define HL_PRTC_MLD_RPTDONE_FWD_MODE (1 << 16) +#define HL_PRTC_MLD_QRY_EN (1 << 17) +#define HL_PRTC_MLD_QRY_FWD_MODE (1 << 18) + /* Broadcom header RX control (16 bit) */ #define B53_BRCM_HDR_RX_DIS 0x60 -- 2.17.1
