[PATCH v3 5/5] net: dsa: qca8k: disable delay for RGMII mode

[Vinod Koul]

In RGMII mode we should not have any delay in port MAC, so disable
the delay.

Signed-off-by: Vinod Koul <vk...@kernel.org>
---
 drivers/net/dsa/qca8k.c | 16 ++++------------
 1 file changed, 4 insertions(+), 12 deletions(-)

diff --git a/drivers/net/dsa/qca8k.c b/drivers/net/dsa/qca8k.c
index 7e97e620bd44..a4b6cda38016 100644
--- a/drivers/net/dsa/qca8k.c
+++ b/drivers/net/dsa/qca8k.c
@@ -420,7 +420,7 @@ qca8k_mib_init(struct qca8k_priv *priv)
 static int
 qca8k_set_pad_ctrl(struct qca8k_priv *priv, int port, int mode)
 {
-       u32 reg;
+       u32 reg, val;
 
        switch (port) {
        case 0:
@@ -439,17 +439,9 @@ qca8k_set_pad_ctrl(struct qca8k_priv *priv, int port, int 
mode)
         */
        switch (mode) {
        case PHY_INTERFACE_MODE_RGMII:
-               qca8k_write(priv, reg,
-                           QCA8K_PORT_PAD_RGMII_EN |
-                           QCA8K_PORT_PAD_RGMII_TX_DELAY(3) |
-                           QCA8K_PORT_PAD_RGMII_RX_DELAY(3));
-
-               /* According to the datasheet, RGMII delay is enabled through
-                * PORT5_PAD_CTRL for all ports, rather than individual port
-                * registers
-                */
-               qca8k_write(priv, QCA8K_REG_PORT5_PAD_CTRL,
-                           QCA8K_PORT_PAD_RGMII_RX_DELAY_EN);
+               /* RGMII mode means no delay so don't enable the delay */
+               val = QCA8K_PORT_PAD_RGMII_EN;
+               qca8k_write(priv, reg, val);
                break;
        case PHY_INTERFACE_MODE_SGMII:
                qca8k_write(priv, reg, QCA8K_PORT_PAD_SGMII_EN);
-- 
2.20.1