On Sunday 03 December 2006 19:39, Michael Wu wrote: > On Sunday 03 December 2006 13:19, Ivo van Doorn wrote: > > rt2400pci, rt2500pci and rt61pci share exactly the > > same code for the eeprom reading. The only difference > > is that rt61pci has a slightly different register reading > > approach. In any case we have a lot of duplicate code. > > Create a new module eeprom_93cx6 inside the rt2x00 folder > > and make rt2x00 use that. > Interesting. adm8211 has code to read 93C66 and 93C46 eeproms, and it looks > similar, albeit smaller and simpler, to your 93cx6 reading code. However, it > looks like your new eeprom reading code is general enough for adm8211 to use > too. I'll have to try it..
I have checked the adm80211 code as well, it seems to behave quite the same, with the most notable difference the fact that adm80211 writes the READ_OPCODE and the word index within a single command, while in eeprom_93cx6 this is split into 2 seperate write commands. I have not yet tested the exact impact for rt2x00 devices when they would combine the write commands, but if that has no impact (or the adm80211 suffers no impact when the write commands are being split) then rt2x00 and adm80211 could indeed share the eeprom_93cx6 module. If eeprom_93cx6 is moved to the /lib folder of the kernel, should it be approved by a different maintainer first? Ivo - To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
