On 15.01.2019 6:12, wangyunjian wrote:
From: Yunjian Wang <wangyunj...@huawei.com>
The skb header should be set to ethernet header before using
is_skb_forwardable. Because the ethernet header length has been
considered in is_skb_forwardable(including dev->hard_header_len
length).
To reproduce the issue:
1, add 2 ports on linux bridge br using following commands:
$ brctl addbr br
$ brctl addif br eth0
$ brctl addif br eth1
2, the mtu of eth0 and eth1 is 1500
3, send a 1504 packet from eth0 to eth1
So the expect result is packet larger than 1500 cannot pass through
eth0 and eth1. But currently, the packet passes through success, it
means eth1's mtu limit donen't take effect.
Doesn't. And MTU.
Fixes: f6367b4660dd ("bridge: use is_skb_forwardable in forward path")
Cc: bri...@lists.linux-foundation.org
Cc: Nkolay Aleksandrov <niko...@cumulusnetworks.com>
Cc: Roopa Prabhu <ro...@cumulusnetworks.com>
Signed-off-by: Yunjian Wang <wangyunj...@huawei.com>
[...]
MBR, Sergei
