[TG3]: Use msleep.
Change some udelay() in some eeprom functions to msleep(). Eeprom
related functions are always called from sleepable context.
Signed-off-by: Michael Chan <[EMAIL PROTECTED]>
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index 99fb4e4..61e9533 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -9467,16 +9467,12 @@ static void __devinit tg3_get_5906_nvram
/* Chips other than 5700/5701 use the NVRAM for fetching info. */
static void __devinit tg3_nvram_init(struct tg3 *tp)
{
- int j;
-
tw32_f(GRC_EEPROM_ADDR,
(EEPROM_ADDR_FSM_RESET |
(EEPROM_DEFAULT_CLOCK_PERIOD <<
EEPROM_ADDR_CLKPERD_SHIFT)));
- /* XXX schedule_timeout() ... */
- for (j = 0; j < 100; j++)
- udelay(10);
+ msleep(1);
/* Enable seeprom accesses. */
tw32_f(GRC_LOCAL_CTRL,
@@ -9537,12 +9533,12 @@ static int tg3_nvram_read_using_eeprom(s
EEPROM_ADDR_ADDR_MASK) |
EEPROM_ADDR_READ | EEPROM_ADDR_START);
- for (i = 0; i < 10000; i++) {
+ for (i = 0; i < 1000; i++) {
tmp = tr32(GRC_EEPROM_ADDR);
if (tmp & EEPROM_ADDR_COMPLETE)
break;
- udelay(100);
+ msleep(1);
}
if (!(tmp & EEPROM_ADDR_COMPLETE))
return -EBUSY;
@@ -9667,12 +9663,12 @@ static int tg3_nvram_write_block_using_e
EEPROM_ADDR_START |
EEPROM_ADDR_WRITE);
- for (j = 0; j < 10000; j++) {
+ for (j = 0; j < 1000; j++) {
val = tr32(GRC_EEPROM_ADDR);
if (val & EEPROM_ADDR_COMPLETE)
break;
- udelay(100);
+ msleep(1);
}
if (!(val & EEPROM_ADDR_COMPLETE)) {
rc = -EBUSY;
-
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
