Add support for Qualcomm ethqos found in some SoCs like QCS404.
Signed-off-by: Vinod Koul <vk...@kernel.org>
---
.../devicetree/bindings/net/qcom,dwmac.txt | 129 ++++++++++++++++++
1 file changed, 129 insertions(+)
create mode 100644 Documentation/devicetree/bindings/net/qcom,dwmac.txt
diff --git a/Documentation/devicetree/bindings/net/qcom,dwmac.txt
b/Documentation/devicetree/bindings/net/qcom,dwmac.txt
new file mode 100644
index 000000000000..652d2213c3ac
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/qcom,dwmac.txt
@@ -0,0 +1,129 @@
+Qualcomm Ethernet ETHQOS device
+
+This device has following properties:
+
+Required properties:
+
+- compatible: Should be qcom,ethqos-qcs404"
+
+- reg: Address and length of the register set for the device
+
+- reg-names: Should contain register names "stmmaceth", "rgmii"
+
+- clocks: Should contain phandle to clocks
+
+- clock-names: Should contain clock names "stmmaceth", "pclk",
+ "ptp_ref", "rgmii"
+
+- interrupts: Should contain phandle to interrupts
+
+- interrupt-names: Should contain interrupt names "macirq", "eth_lpi"
+
+Rest of the properties are defined in stmmac.txt file in same directory
+
+
+Example:
+
+ethernet: ethernet@7a80000 {
+ compatible = "qcom,ethqos-qcs404";
+ reg = <0x07a80000 0x10000>,
+ <0x07a96000 0x100>;
+ reg-names = "stmmaceth", "rgmii";
+ clock-names = "stmmaceth", "pclk", "ptp_ref", "rgmii";
+ clocks = <&gcc GCC_ETH_AXI_CLK>,
+ <&gcc GCC_ETH_SLAVE_AHB_CLK>,
+ <&gcc GCC_ETH_PTP_CLK>,
+ <&gcc GCC_ETH_RGMII_CLK>;
+ interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq", "eth_lpi";
+ snps,reset-gpio = <&tlmm 60 GPIO_ACTIVE_LOW>;
+ snps,reset-active-low;
+ snps,axi-config = <&stmmac_axi_setup>;
+ snps,mtl-rx-config = <&mtl_rx_setup>;
+ snps,mtl-tx-config = <&mtl_tx_setup>;
+
+ snps,txpbl = <8>;
+ snps,rxpbl = <2>;
+ snps,aal;
+ snps,tso;
+
+ phy-handle = <&phy1>;
+ phy-mode = "rgmii";
+
+ stmmac_axi_setup: stmmac-axi-config {
+ snps,wr_osr_lmt = <15>;
+ snps,rd_osr_lmt = <15>;
+ snps,blen = <256 128 64 32 0 0 0>;
+ };
+
+ mtl_rx_setup: rx-queues-config {
+ snps,rx-queues-to-use = <4>;
+ snps,rx-sched-sp;
+ queue0 {
+ snps,dcb-algorithm;
+ snps,map-to-dma-channel = <0x0>;
+ snps,priority = <0x0>;
+ };
+ queue1 {
+ snps,dcb-algorithm;
+ snps,map-to-dma-channel = <0x1>;
+ snps,priority = <0x1>;
+ };
+ queue2 {
+ snps,dcb-algorithm;
+ snps,map-to-dma-channel = <0x2>;
+ snps,priority = <0x1>;
+ };
+ queue3 {
+ snps,dcb-algorithm;
+ snps,map-to-dma-channel = <0x3>;
+ snps,priority = <0x1>;
+ };
+ };
+
+ mtl_tx_setup: tx-queues-config {
+ snps,tx-queues-to-use = <4>;
+ snps,tx-sched-wrr;
+ queue0 {
+ snps,weight = <0x10>;
+ snps,dcb-algorithm;
+ snps,priority = <0x0>;
+ };
+ queue1 {
+ snps,avb-algorithm;
+ snps,send_slope = <0x1000>;
+ snps,idle_slope = <0x1000>;
+ snps,high_credit = <0x3E800>;
+ snps,low_credit = <0xFFC18000>;
+ snps,priority = <0x1>;
+ };
+ queue2 {
+ snps,avb-algorithm;
+ snps,send_slope = <0x1000>;
+ snps,idle_slope = <0x1000>;
+ snps,high_credit = <0x3E800>;
+ snps,low_credit = <0xFFC18000>;
+ snps,priority = <0x1>;
+ };
+ queue3 {
+ snps,avb-algorithm;
+ snps,send_slope = <0x1000>;
+ snps,idle_slope = <0x1000>;
+ snps,high_credit = <0x3E800>;
+ snps,low_credit = <0xFFC18000>;
+ snps,priority = <0x1>;
+ };
+ };
+
+ mdio {
+ #address-cells = <0x1>;
+ #size-cells = <0x0>;
+ compatible = "snps,dwmac-mdio";
+ phy1: phy@4 {
+ device_type = "ethernet-phy";
+ reg = <0x4>;
+ };
+ };
+
+};
--
2.20.1
