[PATCH 5/7] net: phy: at803x: Rework at803x_config_init()

[Vinod Koul]

Rework at803x_config_init() function to check and program the tx and rx
delay enable separately. This will help in checking the delay to be
programmed based on other conditions as well.

Signed-off-by: Vinod Koul <vk...@kernel.org>
---
 drivers/net/phy/at803x.c | 12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)

diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c
index e74a047a846e..63e3d3d774d1 100644
--- a/drivers/net/phy/at803x.c
+++ b/drivers/net/phy/at803x.c
@@ -249,6 +249,7 @@ static int at803x_probe(struct phy_device *phydev)
 
 static int at803x_config_init(struct phy_device *phydev)
 {
+       bool rx_delay = false, tx_delay = false;
        int ret;
 
        ret = genphy_config_init(phydev);
@@ -256,14 +257,19 @@ static int at803x_config_init(struct phy_device *phydev)
                return ret;
 
        if (phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID ||
-                       phydev->interface == PHY_INTERFACE_MODE_RGMII_ID) {
+                       phydev->interface == PHY_INTERFACE_MODE_RGMII_ID)
+               rx_delay = true;
+       if (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID ||
+                       phydev->interface == PHY_INTERFACE_MODE_RGMII_ID)
+               tx_delay = true;
+
+       if (rx_delay) {
                ret = at803x_enable_rx_delay(phydev);
                if (ret < 0)
                        return ret;
        }
 
-       if (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID ||
-                       phydev->interface == PHY_INTERFACE_MODE_RGMII_ID) {
+       if (tx_delay) {
                ret = at803x_enable_tx_delay(phydev);
                if (ret < 0)
                        return ret;
-- 
2.20.1