Hi Andrew, >> Use a phy-handle in the port properties. Thanks !! John
On 2018/12/21 4:56, Andrew Lunn wrote: > On Thu, Dec 20, 2018 at 08:26:56PM -0500, John Rama wrote: >> Hi, Guys, >> >> I have one question. I'm working following configuration, and implementing a >> device driver. >> Basically, port 1-7 is working fine. I'm now having problem on port8. >> >> - System >> - i.MX6 and Marvel 88q5050 Switch(PHY addr is 0x10) >> - port1-5 has integrated PHY >> - port7 is connected to Marvel 88e1510 PHY(PHY addr is 0x1) >> - port8 is connected to Marvel 88e1510 PHY(PHY addr is 0x0), >> but it's the slave of MDIO bus whose master is the switch. >> >> 0x10 >> +------------+ +-----------------+ >> | | | Marvel 88q5050 | >> | | RGMII | port1 | >> | IMX6 +---------+ port6 | >> | | | port2 | >> | | MDIO | | >> | +-+-------+ port3 | >> | | | | | >> +------------+ | | port4 | >> | | | >> +-+-+ | port5 | +---+ >> | |SGMII| |RGMII| | >> |PHY|-----| port7 port8 +-----+PHY+ >> | | | |MDIO | | >> +---+ | +-----+ | >> Marvel 88e1510 +-----------------+ +---+ >> 0x1 Marvel 88e1510 >> 0x0 >> >> - Question >> In the system above, how should we tell DSA driver the PHY address of the >> PHY which is connected to port8 ? > > Hi John > > Use a phy-handle in the port properties. > > Andrew >
