On Thu, 2018-11-29 at 18:54 +0000, Steve Douthit wrote: > Most dsa devices currently expect to get a pointer to a mii_bus from > platform data of device tree information. > > The first patch exposes a mii_bus for ixgbe devices. > > Currently the ixgbe driver only allows accesses to the probed PHY > address via ioctls. The second patch changes that behavior to allow > access to all addresses. This should be useful for doing switch peeks & > pokes from userspace for development, test, or if theres no dsa driver > for a particular switch yet. > > I've tested the clause 22 portion of this code on a board that has an > Intel C3xxx series SoC connected to a Marvell Peridot switch. I don't > have any clause 45 devices or other ixgbe devices to test with. > > Stephen Douthit (2): > ixgbe: register a mdiobus > ixgbe: use mii_bus to handle MII related ioctls > > drivers/net/ethernet/intel/ixgbe/ixgbe.h | 2 + > drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 35 ++-- > drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c | 192 ++++++++++++++++++ > drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h | 2 + > 4 files changed, 216 insertions(+), 15 deletions(-) >
I will add these changes to my queue, please remember to send patches against the drivers in drivers/net/ethernet/intel/* to intel-wired-...@lists.osuosl.org mailing list as well, so that our patchwork project can track the patches.
signature.asc
Description: This is a digitally signed message part
