with CONFIG_THERMAL=m and cxgb4 as built-in build fails, and
'commit e70a57fa59bb ("cxgb4: fix thermal configuration dependencies")'
tires to fix it but when cxgb4i is made built-in build fails again,
use IS_REACHABLE instead of IS_ENABLED to fix the issue.
Fixes: e70a57fa59bb (cxgb4: fix thermal configuration dependencies)
Reported-by: Randy Dunlap <rdun...@infradead.org>
Signed-off-by: Ganesh Goudar <ganes...@chelsio.com>
---
drivers/net/ethernet/chelsio/Kconfig | 1 -
drivers/net/ethernet/chelsio/cxgb4/Makefile | 4 +---
drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c | 12 ++++++------
3 files changed, 7 insertions(+), 10 deletions(-)
diff --git a/drivers/net/ethernet/chelsio/Kconfig
b/drivers/net/ethernet/chelsio/Kconfig
index 75c1c5e..e2cdfa7 100644
--- a/drivers/net/ethernet/chelsio/Kconfig
+++ b/drivers/net/ethernet/chelsio/Kconfig
@@ -67,7 +67,6 @@ config CHELSIO_T3
config CHELSIO_T4
tristate "Chelsio Communications T4/T5/T6 Ethernet support"
depends on PCI && (IPV6 || IPV6=n)
- depends on THERMAL || !THERMAL
select FW_LOADER
select MDIO
select ZLIB_DEFLATE
diff --git a/drivers/net/ethernet/chelsio/cxgb4/Makefile
b/drivers/net/ethernet/chelsio/cxgb4/Makefile
index 78e5d17..91d8a88 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/Makefile
+++ b/drivers/net/ethernet/chelsio/cxgb4/Makefile
@@ -12,6 +12,4 @@ cxgb4-objs := cxgb4_main.o l2t.o smt.o t4_hw.o sge.o
clip_tbl.o cxgb4_ethtool.o
cxgb4-$(CONFIG_CHELSIO_T4_DCB) += cxgb4_dcb.o
cxgb4-$(CONFIG_CHELSIO_T4_FCOE) += cxgb4_fcoe.o
cxgb4-$(CONFIG_DEBUG_FS) += cxgb4_debugfs.o
-ifdef CONFIG_THERMAL
-cxgb4-objs += cxgb4_thermal.o
-endif
+cxgb4-$(CONFIG_THERMAL) += cxgb4_thermal.o
diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
index 05a4692..bd85210 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
@@ -5863,10 +5863,10 @@ static int init_one(struct pci_dev *pdev, const struct
pci_device_id *ent)
if (!is_t4(adapter->params.chip))
cxgb4_ptp_init(adapter);
- if (IS_ENABLED(CONFIG_THERMAL) &&
- !is_t4(adapter->params.chip) && (adapter->flags & FW_OK))
+#if IS_REACHABLE(CONFIG_THERMAL)
+ if (!is_t4(adapter->params.chip) && (adapter->flags & FW_OK))
cxgb4_thermal_init(adapter);
-
+#endif
print_adapter_info(adapter);
return 0;
@@ -5932,9 +5932,9 @@ static void remove_one(struct pci_dev *pdev)
if (!is_t4(adapter->params.chip))
cxgb4_ptp_stop(adapter);
- if (IS_ENABLED(CONFIG_THERMAL))
- cxgb4_thermal_remove(adapter);
-
+#if IS_REACHABLE(CONFIG_THERMAL)
+ cxgb4_thermal_remove(adapter);
+#endif
/* If we allocated filters, free up state associated with any
* valid filters ...
*/
--
2.1.0
