W dniu 10.11.2018 o 20:34, Jesper Dangaard Brouer pisze:
I want you to experiment with:
ethtool --set-priv-flags DEVICE rx_striding_rq off
just checked that previously connectx4 was have thos disabled:
ethtool --show-priv-flags enp175s0f0
Private flags for enp175s0f0:
rx_cqe_moder : on
tx_cqe_moder : off
rx_cqe_compress : off
rx_striding_rq : off
rx_no_csum_complete: off
So now we are on connectx5 and we have enabled - for sure connectx5
changed cpu load - where i have now max 50/60% cpu where with connectx4
there was sometimes near 100% with same configuration.
