This patch separate emac_mdio_bus_create and emac_get_phydev from
emac_phy_config, and do some codes clean.
Signed-off-by: Wang Dongsheng <dongsheng.w...@hxt-semitech.com>
---
drivers/net/ethernet/qualcomm/emac/emac-phy.c | 96 +++++++++++--------
1 file changed, 56 insertions(+), 40 deletions(-)
diff --git a/drivers/net/ethernet/qualcomm/emac/emac-phy.c
b/drivers/net/ethernet/qualcomm/emac/emac-phy.c
index 53dbf1e163a8..8289fdda4be7 100644
--- a/drivers/net/ethernet/qualcomm/emac/emac-phy.c
+++ b/drivers/net/ethernet/qualcomm/emac/emac-phy.c
@@ -96,15 +96,15 @@ static int emac_mdio_write(struct mii_bus *bus, int addr,
int regnum, u16 val)
return 0;
}
-/* Configure the MDIO bus and connect the external PHY */
-int emac_phy_config(struct platform_device *pdev, struct emac_adapter *adpt)
+static int emac_mdio_bus_create(struct platform_device *pdev,
+ struct emac_adapter *adpt)
{
struct device_node *np = pdev->dev.of_node;
struct mii_bus *mii_bus;
int ret;
/* Create the mii_bus object for talking to the MDIO bus */
- adpt->mii_bus = mii_bus = devm_mdiobus_alloc(&pdev->dev);
+ mii_bus = devm_mdiobus_alloc(&pdev->dev);
if (!mii_bus)
return -ENOMEM;
@@ -115,50 +115,66 @@ int emac_phy_config(struct platform_device *pdev, struct
emac_adapter *adpt)
mii_bus->parent = &pdev->dev;
mii_bus->priv = adpt;
- if (has_acpi_companion(&pdev->dev)) {
- u32 phy_addr;
-
- ret = mdiobus_register(mii_bus);
- if (ret) {
- dev_err(&pdev->dev, "could not register mdio bus\n");
- return ret;
- }
- ret = device_property_read_u32(&pdev->dev, "phy-channel",
- &phy_addr);
- if (ret)
- /* If we can't read a valid phy address, then assume
- * that there is only one phy on this mdio bus.
- */
- adpt->phydev = phy_find_first(mii_bus);
- else
- adpt->phydev = mdiobus_get_phy(mii_bus, phy_addr);
-
- /* of_phy_find_device() claims a reference to the phydev,
- * so we do that here manually as well. When the driver
- * later unloads, it can unilaterally drop the reference
- * without worrying about ACPI vs DT.
- */
- if (adpt->phydev)
- get_device(&adpt->phydev->mdio.dev);
- } else {
- struct device_node *phy_np;
-
- ret = of_mdiobus_register(mii_bus, np);
- if (ret) {
- dev_err(&pdev->dev, "could not register mdio bus\n");
- return ret;
- }
+ ret = of_mdiobus_register(mii_bus, has_acpi_companion(&pdev->dev) ?
+ NULL : np);
+ if (ret)
+ dev_err(&pdev->dev, "Could not register mdio bus\n");
+
+ adpt->mii_bus = ret ? NULL : mii_bus;
+ return ret;
+}
+
+static int emac_get_phydev(struct platform_device *pdev,
+ struct emac_adapter *adpt)
+{
+ struct device_node *np = pdev->dev.of_node;
+ struct mii_bus *bus = adpt->mii_bus;
+ struct device_node *phy_np;
+ struct phy_device *phydev;
+ u32 phy_addr;
+ int ret;
+
+ if (!has_acpi_companion(&pdev->dev)) {
phy_np = of_parse_phandle(np, "phy-handle", 0);
adpt->phydev = of_phy_find_device(phy_np);
of_node_put(phy_np);
+ return adpt->phydev ? 0 : -ENODEV;
}
- if (!adpt->phydev) {
- dev_err(&pdev->dev, "could not find external phy\n");
- mdiobus_unregister(mii_bus);
+ ret = device_property_read_u32(&pdev->dev, "phy-channel",
+ &phy_addr);
+ /* If we can't read a valid phy address, then assume
+ * that there is only one phy on this mdio bus.
+ */
+ phydev = ret ? phy_find_first(bus) : mdiobus_get_phy(bus, phy_addr);
+ if (!phydev)
return -ENODEV;
- }
+ /* of_phy_find_device() claims a reference to the phydev,
+ * so we do that here manually as well. When the driver
+ * later unloads, it can unilaterally drop the reference
+ * without worrying about ACPI vs DT.
+ */
+ get_device(&phydev->mdio.dev);
+ adpt->phydev = phydev;
return 0;
}
+
+/* Configure the MDIO bus and connect the external PHY */
+int emac_phy_config(struct platform_device *pdev, struct emac_adapter *adpt)
+{
+ int ret;
+
+ ret = emac_mdio_bus_create(pdev, adpt);
+ if (ret)
+ return ret;
+
+ ret = emac_get_phydev(pdev, adpt);
+ if (ret) {
+ dev_err(&pdev->dev, "Could not find external phy\n");
+ mdiobus_unregister(adpt->mii_bus);
+ }
+
+ return ret;
+}
--
2.18.0
