On Wed, Oct 24, 2018 at 09:36:02PM +0200, Holger Hoffstätte wrote:
> Hi,
>
> Since 4.19 r8169 depends on phylib:
>
> $lsmod | grep r8169
> r8169 81920 0
> libphy 57344 2 r8169,realtek
>
> Unfortunately this now gives me the following sysfs error:
>
> $cd /sys/module/realtek/drivers
> $ls -l
> ls: cannot access 'mdio_bus:RTL8201F 10/100Mbps Ethernet': No such file or
> directory
> total 0
> lrwxrwxrwx 1 root root 0 Oct 24 21:09 'mdio_bus:RTL8201CP Ethernet' ->
> '../../../bus/mdio_bus/drivers/RTL8201CP Ethernet'
> l????????? ? ? ? ? ? 'mdio_bus:RTL8201F 10/100Mbps Ethernet'
> lrwxrwxrwx 1 root root 0 Oct 24 21:09 'mdio_bus:RTL8211 Gigabit Ethernet' ->
> '../../../bus/mdio_bus/drivers/RTL8211 Gigabit Ethernet'
> [..]
>
> Apparently the forward slash in "10/100Mbps Ethernet" is interpreted as
> directory separator that leads nowhere, and was introduced in commit
> 513588dd44b ("net: phy: realtek: add RTL8201F phy-id and functions").
>
> Would it be acceptable to change the name simply to "RTL8201F Ethernet"?
Hi Holger
Or use "RTL8201F Fast Ethernet"
I wonder if other drivers have similar problems?
davicom.c: .name = "Davicom DM9161B/C",
intel-xway.c: .name = "Intel XWAY PHY11G (PEF 7071/PEF
7072) v1.3",
intel-xway.c: .name = "Intel XWAY PHY11G (PEF 7071/PEF
7072) v1.4",
intel-xway.c: .name = "Intel XWAY PHY11G (PEF 7071/PEF
7072) v1.5 / v1.6",
intel-xway.c: .name = "Intel XWAY PHY22F (PEF 7061) v1.5 /
v1.6",
smsc.c: .name = "SMSC LAN8710/LAN8720",
Andrew
