It has been reported that since
commit 05212ba8132b42 ("r8169: set RxConfig after tx/rx is enabled for
RTL8169sb/8110sb devices")
at least RTL_GIGA_MAC_VER_38 NICs work erratically after a resume from
suspend.
The problem has been traced to a missing RX_MULTI_EN bit in the RxConfig
register.
We already set this bit for RTL_GIGA_MAC_VER_35 NICs of the same 8168F
chip family so let's do it also for its other siblings: RTL_GIGA_MAC_VER_36
and RTL_GIGA_MAC_VER_38.
Curiously, the NIC seems to work fine after a system boot without having
this bit set as long as the system isn't suspended and resumed.
Fixes: 05212ba8132b42 ("r8169: set RxConfig after tx/rx is enabled for
RTL8169sb/8110sb devices")
Reported-by: Chris Clayton <chris2...@googlemail.com>
Signed-off-by: Maciej S. Szmigiero <m...@maciej.szmigiero.name>
---
drivers/net/ethernet/realtek/r8169.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/realtek/r8169.c
b/drivers/net/ethernet/realtek/r8169.c
index 7d3f671e1bb3..b68e32186d67 100644
--- a/drivers/net/ethernet/realtek/r8169.c
+++ b/drivers/net/ethernet/realtek/r8169.c
@@ -4269,8 +4269,8 @@ static void rtl_init_rxcfg(struct rtl8169_private *tp)
RTL_W32(tp, RxConfig, RX_FIFO_THRESH | RX_DMA_BURST);
break;
case RTL_GIGA_MAC_VER_18 ... RTL_GIGA_MAC_VER_24:
- case RTL_GIGA_MAC_VER_34:
- case RTL_GIGA_MAC_VER_35:
+ case RTL_GIGA_MAC_VER_34 ... RTL_GIGA_MAC_VER_36:
+ case RTL_GIGA_MAC_VER_38:
RTL_W32(tp, RxConfig, RX128_INT_EN | RX_MULTI_EN |
RX_DMA_BURST);
break;
case RTL_GIGA_MAC_VER_40 ... RTL_GIGA_MAC_VER_51:
--
2.17.0
