Koushik, Raju,
Please review, comment, and if you find this acceptable,
please forward upstream.
--linas
This patch adds PCI error recovery support to the
s2io 10-Gigabit ethernet device driver.
Tested, seems to work well.
Signed-off-by: Linas Vepstas <[EMAIL PROTECTED]>
Cc: Raghavendra Koushik <[EMAIL PROTECTED]>
Cc: Ananda Raju <[EMAIL PROTECTED]>
Cc: Wen Xiong <[EMAIL PROTECTED]>
----
drivers/net/s2io.c | 77 +++++++++++++++++++++++++++++++++++++++++++++++++++++
drivers/net/s2io.h | 5 +++
2 files changed, 82 insertions(+)
Index: linux-2.6.19-rc1-git11/drivers/net/s2io.c
===================================================================
--- linux-2.6.19-rc1-git11.orig/drivers/net/s2io.c 2006-10-20
12:24:17.000000000 -0500
+++ linux-2.6.19-rc1-git11/drivers/net/s2io.c 2006-10-24 16:19:49.000000000
-0500
@@ -434,11 +434,18 @@ static struct pci_device_id s2io_tbl[] _
MODULE_DEVICE_TABLE(pci, s2io_tbl);
+static struct pci_error_handlers s2io_err_handler = {
+ .error_detected = s2io_io_error_detected,
+ .slot_reset = s2io_io_slot_reset,
+ .resume = s2io_io_resume,
+};
+
static struct pci_driver s2io_driver = {
.name = "S2IO",
.id_table = s2io_tbl,
.probe = s2io_init_nic,
.remove = __devexit_p(s2io_rem_nic),
+ .err_handler = &s2io_err_handler,
};
/* A simplifier macro used both by init and free shared_mem Fns(). */
@@ -7564,3 +7571,73 @@ static void lro_append_pkt(nic_t *sp, lr
sp->mac_control.stats_info->sw_stat.clubbed_frms_cnt++;
return;
}
+
+/**
+ * s2io_io_error_detected - called when PCI error is detected
+ * @pdev: Pointer to PCI device
+ * @state: The current pci conneection state
+ *
+ * This function is called after a PCI bus error affecting
+ * this device has been detected.
+ */
+static pci_ers_result_t s2io_io_error_detected(struct pci_dev *pdev,
pci_channel_state_t state)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ nic_t *sp = netdev->priv;
+
+ netif_device_detach(netdev);
+
+ if (netif_running(netdev)) {
+ /* Reset card */
+ s2io_card_down(sp);
+ sp->device_close_flag = TRUE; /* Device is shut down. */
+ }
+ pci_disable_device(pdev);
+
+ return PCI_ERS_RESULT_NEED_RESET;
+}
+
+/**
+ * s2io_io_slot_reset - called after the pci bus has been reset.
+ * @pdev: Pointer to PCI device
+ *
+ * Restart the card from scratch, as if from a cold-boot.
+ */
+static pci_ers_result_t s2io_io_slot_reset(struct pci_dev *pdev)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ nic_t *sp = netdev->priv;
+
+ if (pci_enable_device(pdev)) {
+ printk(KERN_ERR "s2io: Cannot re-enable PCI device after
reset.\n");
+ return PCI_ERS_RESULT_DISCONNECT;
+ }
+
+ pci_set_master(pdev);
+ s2io_reset(sp);
+
+ return PCI_ERS_RESULT_RECOVERED;
+}
+
+/**
+ * s2io_io_resume - called when traffic can start flowing again.
+ * @pdev: Pointer to PCI device
+ *
+ * This callback is called when the error recovery driver tells us that
+ * its OK to resume normal operation.
+ */
+static void s2io_io_resume(struct pci_dev *pdev)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ nic_t *sp = netdev->priv;
+
+ if (netif_running(netdev)) {
+ if (s2io_card_up(sp)) {
+ printk(KERN_ERR "s2io: can't bring device back up after
reset\n");
+ return;
+ }
+ }
+
+ netif_device_attach(netdev);
+ netif_wake_queue(netdev);
+}
Index: linux-2.6.19-rc1-git11/drivers/net/s2io.h
===================================================================
--- linux-2.6.19-rc1-git11.orig/drivers/net/s2io.h 2006-10-20
12:24:17.000000000 -0500
+++ linux-2.6.19-rc1-git11/drivers/net/s2io.h 2006-10-20 12:41:39.000000000
-0500
@@ -1013,6 +1013,11 @@ static void queue_rx_frame(struct sk_buf
static void update_L3L4_header(nic_t *sp, lro_t *lro);
static void lro_append_pkt(nic_t *sp, lro_t *lro, struct sk_buff *skb, u32
tcp_len);
+static pci_ers_result_t s2io_io_error_detected(struct pci_dev *pdev,
+
pci_channel_state_t state);
+static pci_ers_result_t s2io_io_slot_reset(struct pci_dev *pdev);
+static void s2io_io_resume(struct pci_dev *pdev);
+
#define s2io_tcp_mss(skb) skb_shinfo(skb)->gso_size
#define s2io_udp_mss(skb) skb_shinfo(skb)->gso_size
#define s2io_offload_type(skb) skb_shinfo(skb)->gso_type
-
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
