We can turn on the RX/TX checksum offloads by default and make sure that
those are properly reflected back to e.g: stacked devices such as VLAN
or DSA.
Signed-off-by: Florian Fainelli <f.faine...@gmail.com>
---
drivers/net/ethernet/broadcom/bcmsysport.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/broadcom/bcmsysport.c
b/drivers/net/ethernet/broadcom/bcmsysport.c
index 3b4cb906a275..977d9dec2fb0 100644
--- a/drivers/net/ethernet/broadcom/bcmsysport.c
+++ b/drivers/net/ethernet/broadcom/bcmsysport.c
@@ -2508,9 +2508,10 @@ static int bcm_sysport_probe(struct platform_device
*pdev)
dev->netdev_ops = &bcm_sysport_netdev_ops;
netif_napi_add(dev, &priv->napi, bcm_sysport_poll, 64);
- /* HW supported features, none enabled by default */
- dev->hw_features |= NETIF_F_RXCSUM | NETIF_F_HIGHDMA |
- NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM;
+ dev->features |= NETIF_F_RXCSUM | NETIF_F_HIGHDMA |
+ NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM;
+ dev->hw_features |= dev->features;
+ dev->vlan_features |= dev->features;
/* Request the WOL interrupt and advertise suspend if available */
priv->wol_irq_disabled = 1;
--
2.17.1
