On 09/05/2018 12:23 PM, Florian Fainelli wrote: > Hi all, > > This patch series adds support for the SerDes found on NorthStar Plus > (NSP) which allows us to use the SFP port on the BCM958625HR board (and > other similar designs).
David, please disregard this version, for some reason I managed to send the incorrect one that does not have the threaded interrupt support. > > Changes in v2: > > - migrate to threaded interrupt (Andrew) > - fixed a case where MLO_AN_FIXED's mac_config would still call into > the serdes_config callback > - added an additional check on the phylink interface in mac_config > - default to ARCH_BCM_NSP instead of ARCH_BCM_IPROC which is really > the NSP Kconfig bit we want > > Florian Fainelli (5): > net: dsa: b53: Add ability to enable/disable port interrupts > net: dsa: b53: Make SRAB driver manage port interrupts > net: dsa: b53: Add helper to set link parameters > net: dsa: b53: Add PHYLINK support > net: dsa: b53: Add SerDes support > > drivers/net/dsa/b53/Kconfig | 7 + > drivers/net/dsa/b53/Makefile | 1 + > drivers/net/dsa/b53/b53_common.c | 246 +++++++++++++++++++++++++++---- > drivers/net/dsa/b53/b53_priv.h | 36 +++++ > drivers/net/dsa/b53/b53_serdes.c | 217 +++++++++++++++++++++++++++ > drivers/net/dsa/b53/b53_serdes.h | 121 +++++++++++++++ > drivers/net/dsa/b53/b53_srab.c | 210 ++++++++++++++++++++++++++ > 7 files changed, 809 insertions(+), 29 deletions(-) > create mode 100644 drivers/net/dsa/b53/b53_serdes.c > create mode 100644 drivers/net/dsa/b53/b53_serdes.h > -- Florian
