From: Ido Schimmel <ido...@mellanox.com> Date: Mon, 25 Jun 2018 10:48:12 +0300
> Petr says: > > When traffic is inserted on a router interface associated with an 802.1q > bridge, the VLAN that the traffic appears on is determined by PVID of > the bridge device itself. However currently mlxsw always configures such > traffic to be forwarded to VLAN 1, regardless of the bridge PVID. > > Fix the problem by modifying the FID-handling code to assign such > traffic not to FID that corresponds to VLAN 1, but to a FID that > corresponds to the configured PVID. Bail out if there is no PVID. This > is implemented in patches #1 and #2. > > From that point on, also forbid any changes to bridge device PVID, > because such changes would not be reflected. This is implemented in > patches #3, #4 and #5. > > Finally in patch #6, introduce tests that use bridge as a routed > interface, and test mlxsw in both the currently-supported scenario of > using PVID 1, and the newly-supported one of using a custom PVID. Series applied, thank you.
