The pch_gbe driver currently presumes that the PHY is connected using
RGMII, and would need further work to support other buses. It includes a
define which is always set that conditionalises some of the
RGMII-specific code regardless. Remove it. If we do ever support
different MII buses then preprocessor defines won't be the best way to
select between them anyway.
Signed-off-by: Paul Burton <paul.bur...@mips.com>
---
drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c | 9 ---------
drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_phy.h | 1 -
2 files changed, 10 deletions(-)
diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
index 5846e8cf1750..11c42aa42b8a 100644
--- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
+++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
@@ -366,9 +366,7 @@ static void pch_gbe_mac_reset_hw(struct pch_gbe_hw *hw)
/* Read the MAC address. and store to the private data */
pch_gbe_mac_read_mac_addr(hw);
iowrite32(PCH_GBE_ALL_RST, &hw->reg->RESET);
-#ifdef PCH_GBE_MAC_IFOP_RGMII
iowrite32(PCH_GBE_MODE_GMII_ETHER, &hw->reg->MODE);
-#endif
pch_gbe_wait_clr_bit(&hw->reg->RESET, PCH_GBE_ALL_RST);
/* Setup the receive addresses */
pch_gbe_mac_mar_set(hw, hw->mac.addr, 0);
@@ -776,9 +774,7 @@ void pch_gbe_reset(struct pch_gbe_adapter *adapter)
}
pch_gbe_phy_init_setting(hw);
/* Setup Mac interface option RGMII */
-#ifdef PCH_GBE_MAC_IFOP_RGMII
pch_gbe_phy_set_rgmii(hw);
-#endif
}
/**
@@ -1044,7 +1040,6 @@ static void pch_gbe_set_rgmii_ctrl(struct pch_gbe_adapter
*adapter, u16 speed,
unsigned long rgmii = 0;
/* Set the RGMII control. */
-#ifdef PCH_GBE_MAC_IFOP_RGMII
switch (speed) {
case SPEED_10:
rgmii = (PCH_GBE_RGMII_RATE_2_5M |
@@ -1060,10 +1055,6 @@ static void pch_gbe_set_rgmii_ctrl(struct
pch_gbe_adapter *adapter, u16 speed,
break;
}
iowrite32(rgmii, &hw->reg->RGMII_CTRL);
-#else /* GMII */
- rgmii = 0;
- iowrite32(rgmii, &hw->reg->RGMII_CTRL);
-#endif
}
static void pch_gbe_set_mode(struct pch_gbe_adapter *adapter, u16 speed,
u16 duplex)
diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_phy.h
b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_phy.h
index efb955be8cac..23ac38711619 100644
--- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_phy.h
+++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_phy.h
@@ -21,7 +21,6 @@
#define PCH_GBE_PHY_REGS_LEN 32
#define PCH_GBE_PHY_RESET_DELAY_US 10
-#define PCH_GBE_MAC_IFOP_RGMII
s32 pch_gbe_phy_get_id(struct pch_gbe_hw *hw);
s32 pch_gbe_phy_read_reg_miic(struct pch_gbe_hw *hw, u32 offset, u16 *data);
--
2.17.1
