Andrew On 05/11/2018 01:30 PM, Andrew Lunn wrote: > On Fri, May 11, 2018 at 01:08:19PM -0500, Dan Murphy wrote: >> Add support for the DP83811 phy. >> >> The DP83811 supports both rgmii and sgmii interfaces. >> There are 2 part numbers for this the DP83TC811R does not >> reliably support the SGMII interface but the DP83TC811S will. >> >> There is not a way to differentiate these parts from the >> hardware or register set. So this is controlled via the DT >> to indicate which phy mode is required. Or the part can be >> strapped to a certain interface. >> >> Data sheet can be found here: >> http://www.ti.com/product/DP83TC811S-Q1/description >> http://www.ti.com/product/DP83TC811R-Q1/description >> >> Signed-off-by: Dan Murphy <dmur...@ti.com> > > Hi Dan > > It is normal to add any Reviewed-by, or Tested-by: tags you received, > so long as you don't make major changes. >
Thanks for the reminder. I usually add them if I get them explicitly stated in the review. I have not seen any Reviewed-by or Tested-by tags in any of the replies for the patch. But I may have missed it. Dan > Andrew > -- ------------------ Dan Murphy
