[PATCH net-next v2 11/13] arm64: dts: marvell: mcbin: enable the fourth network interface

[Antoine Tenart]

This patch enables the fourth network interface on the Marvell
Macchiatobin. It is configured in the 2500Base-X PHY mode. The SFP cage
is also described.

Signed-off-by: Antoine Tenart <antoine.ten...@bootlin.com>
---
 .../boot/dts/marvell/armada-8040-mcbin.dts    | 32 +++++++++++++++++++
 1 file changed, 32 insertions(+)

diff --git a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts 
b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts
index eaa67de8c2bb..a66958ff4de6 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts
+++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts
@@ -27,6 +27,7 @@
                ethernet0 = &cp0_eth0;
                ethernet1 = &cp1_eth0;
                ethernet2 = &cp1_eth1;
+               ethernet3 = &cp1_eth2;
        };
 
        /* Regulator labels correspond with schematics */
@@ -88,6 +89,18 @@
                pinctrl-names = "default";
                pinctrl-0 = <&cp1_sfpp1_pins &cp0_sfpp1_pins>;
        };
+
+       sfp_eth3: sfp-eth3 {
+               /* CON3,4 - CPS lane 5 */
+               compatible = "sff,sfp";
+               i2c-bus = <&sfp_1g_i2c>;
+               los-gpio = <&cp0_gpio2 22 GPIO_ACTIVE_HIGH>;
+               mod-def0-gpio = <&cp0_gpio2 21 GPIO_ACTIVE_LOW>;
+               tx-disable-gpio = <&cp1_gpio1 24 GPIO_ACTIVE_HIGH>;
+               tx-fault-gpio = <&cp0_gpio2 19 GPIO_ACTIVE_HIGH>;
+               pinctrl-names = "default";
+               pinctrl-0 = <&cp0_sfp_1g_pins &cp1_sfp_1g_pins>;
+       };
 };
 
 &uart0 {
@@ -195,6 +208,10 @@
                marvell,pins = "mpp47";
                marvell,function = "gpio";
        };
+       cp0_sfp_1g_pins: sfp-1g-pins {
+               marvell,pins = "mpp51", "mpp53", "mpp54";
+               marvell,function = "gpio";
+       };
        cp0_pcie_pins: pcie-pins {
                marvell,pins = "mpp52";
                marvell,function = "gpio";
@@ -287,6 +304,17 @@
        phys = <&cp1_comphy0 1>;
 };
 
+&cp1_eth2 {
+       /* CPS Lane 5 */
+       status = "okay";
+       /* Network PHY */
+       phy-mode = "2500base-x";
+       managed = "in-band-status";
+       /* Generic PHY, providing serdes lanes */
+       phys = <&cp1_comphy5 2>;
+       sfp = <&sfp_eth3>;
+};
+
 &cp1_pinctrl {
        cp1_sfpp1_pins: sfpp1-pins {
                marvell,pins = "mpp8", "mpp10", "mpp11";
@@ -300,6 +328,10 @@
                marvell,pins = "mpp6", "mpp7";
                marvell,function = "uart0";
        };
+       cp1_sfp_1g_pins: sfp-1g-pins {
+               marvell,pins = "mpp24";
+               marvell,function = "gpio";
+       };
        cp1_sfpp0_pins: sfpp0-pins {
                marvell,pins = "mpp26", "mpp27", "mpp28", "mpp29";
                marvell,function = "gpio";
-- 
2.17.0