(adding devicetree list)
Ramon Fried <rfr...@codeaurora.org> writes:
> wcn3610 can only operate on 2.4GHz band due to RF limitation.
> If wcn36xx digital block is associated with an external IRIS
> RF module, retrieve the id and disable 5GHz band in case of
> wcn3610 id.
>
> Signed-off-by: Ramon Fried <rfr...@codeaurora.org>
> ---
> v2: fixed wrong assignment, which is logically introduces the
> same behaviour, but for correctness.
>
> drivers/net/wireless/ath/wcn36xx/main.c | 4 +++-
> drivers/net/wireless/ath/wcn36xx/wcn36xx.h | 1 +
> 2 files changed, 4 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/net/wireless/ath/wcn36xx/main.c
> b/drivers/net/wireless/ath/wcn36xx/main.c
> index ab5be6d2c691..833531a68c95 100644
> --- a/drivers/net/wireless/ath/wcn36xx/main.c
> +++ b/drivers/net/wireless/ath/wcn36xx/main.c
> @@ -1146,7 +1146,7 @@ static int wcn36xx_init_ieee80211(struct wcn36xx *wcn)
> BIT(NL80211_IFTYPE_MESH_POINT);
>
> wcn->hw->wiphy->bands[NL80211_BAND_2GHZ] = &wcn_band_2ghz;
> - if (wcn->rf_id != RF_IRIS_WCN3620)
> + if (wcn->rf_id != RF_IRIS_WCN3610 && wcn->rf_id != RF_IRIS_WCN3620)
> wcn->hw->wiphy->bands[NL80211_BAND_5GHZ] = &wcn_band_5ghz;
>
> wcn->hw->wiphy->max_scan_ssids = WCN36XX_MAX_SCAN_SSIDS;
> @@ -1248,6 +1248,8 @@ static int wcn36xx_platform_get_resources(struct
> wcn36xx *wcn,
> if (iris_node) {
> if (of_device_is_compatible(iris_node, "qcom,wcn3620"))
> wcn->rf_id = RF_IRIS_WCN3620;
> + else if (of_device_is_compatible(iris_node, "qcom,wcn3610"))
> + wcn->rf_id = RF_IRIS_WCN3610;
> of_node_put(iris_node);
> }
Should we document qcom,wcn3610 just like wcn3620 is:
Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.txt:
"qcom,wcn3620",
--
Kalle Valo
