On Tue, Mar 13, 2018 at 08:51:51AM -0500, Razvan Stefanescu wrote:
> Add the command build/parse APIs for operating on DPSW objects through
> the DPAA2 Management Complex.
>
> Signed-off-by: Razvan Stefanescu <razvan.stefane...@nxp.com>
> ---
> Changelog:
> v2:
> - use u8 for en parameter of dpsw_if_set_flooding/broadcast()
> v3:
> - no changes
> v4:
> - adjust to moving MC-bus out of staging
> - fix sparse warnings
> v5:
> - no changes
>
> drivers/staging/fsl-dpaa2/Kconfig | 8 +
> drivers/staging/fsl-dpaa2/Makefile | 1 +
> drivers/staging/fsl-dpaa2/ethsw/Makefile | 7 +
> drivers/staging/fsl-dpaa2/ethsw/dpsw-cmd.h | 358 +++++++++
> drivers/staging/fsl-dpaa2/ethsw/dpsw.c | 1116
> ++++++++++++++++++++++++++++
> drivers/staging/fsl-dpaa2/ethsw/dpsw.h | 579 +++++++++++++++
> 6 files changed, 2069 insertions(+)
> create mode 100644 drivers/staging/fsl-dpaa2/ethsw/Makefile
> create mode 100644 drivers/staging/fsl-dpaa2/ethsw/dpsw-cmd.h
> create mode 100644 drivers/staging/fsl-dpaa2/ethsw/dpsw.c
> create mode 100644 drivers/staging/fsl-dpaa2/ethsw/dpsw.h
>
> diff --git a/drivers/staging/fsl-dpaa2/Kconfig
> b/drivers/staging/fsl-dpaa2/Kconfig
> index dfff675..8a508ef 100644
> --- a/drivers/staging/fsl-dpaa2/Kconfig
> +++ b/drivers/staging/fsl-dpaa2/Kconfig
> @@ -16,3 +16,11 @@ config FSL_DPAA2_ETH
> ---help---
> Ethernet driver for Freescale DPAA2 SoCs, using the
> Freescale MC bus driver
> +
> +config FSL_DPAA2_ETHSW
> + tristate "Freescale DPAA2 Ethernet Switch"
> + depends on FSL_DPAA2
> + depends on NET_SWITCHDEV
> + ---help---
> + Driver for Freescale DPAA2 Ethernet Switch. Select
> + BRIDGE to have support for bridge tools.
> diff --git a/drivers/staging/fsl-dpaa2/Makefile
> b/drivers/staging/fsl-dpaa2/Makefile
> index 0836ba8..6cfd76b 100644
> --- a/drivers/staging/fsl-dpaa2/Makefile
> +++ b/drivers/staging/fsl-dpaa2/Makefile
> @@ -3,3 +3,4 @@
> #
>
> obj-$(CONFIG_FSL_DPAA2_ETH) += ethernet/
> +obj-$(CONFIG_FSL_DPAA2_ETHSW) += ethsw/
> diff --git a/drivers/staging/fsl-dpaa2/ethsw/Makefile
> b/drivers/staging/fsl-dpaa2/ethsw/Makefile
> new file mode 100644
> index 0000000..db137f7
> --- /dev/null
> +++ b/drivers/staging/fsl-dpaa2/ethsw/Makefile
> @@ -0,0 +1,7 @@
> +#
> +# Makefile for the Freescale DPAA2 Ethernet Switch
> +#
> +
> +obj-$(CONFIG_FSL_DPAA2_ETHSW) += dpaa2-ethsw.o
> +
> +dpaa2-ethsw-objs := dpsw.o
> diff --git a/drivers/staging/fsl-dpaa2/ethsw/dpsw-cmd.h
> b/drivers/staging/fsl-dpaa2/ethsw/dpsw-cmd.h
> new file mode 100644
> index 0000000..36edef6
> --- /dev/null
> +++ b/drivers/staging/fsl-dpaa2/ethsw/dpsw-cmd.h
> @@ -0,0 +1,358 @@
> +/* Copyright 2013-2016 Freescale Semiconductor Inc.
> + * Copyright 2017-2018 NXP
> + *
> + * Redistribution and use in source and binary forms, with or without
> + * modification, are permitted provided that the following conditions are
> met:
> + * * Redistributions of source code must retain the above copyright
> + * notice, this list of conditions and the following disclaimer.
> + * * Redistributions in binary form must reproduce the above copyright
> + * notice, this list of conditions and the following disclaimer in the
> + * documentation and/or other materials provided with the distribution.
> + * * Neither the name of the above-listed copyright holders nor the
> + * names of any contributors may be used to endorse or promote products
> + * derived from this software without specific prior written permission.
> + *
> + *
> + * ALTERNATIVELY, this software may be distributed under the terms of the
> + * GNU General Public License ("GPL") as published by the Free Software
> + * Foundation, either version 2 of that License or (at your option) any
> + * later version.
> + *
> + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
> IS"
> + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
> + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
> + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE
> + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
> + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
> + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
> + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
> + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
> + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
> + * POSSIBILITY OF SUCH DAMAGE.
> + */
Can you resend this series and just use the correct SPDX identifiers for
all of the new files, instead of all of this horrid boiler-plate code?
That will save me time when I have to go delete all of this in the near
future :)
Also, why dual license it? Are you _SURE_ you want to do that, and are
totally aware of all of the crazy issues surrounding it? Hint, it
almost never means what you might think it does, and I have yet to know
of anyone doing anything "real" with any dual-licensed Linux kernel
code.
Remember, BSD is not the license you want/need for GPL header files that
are exposed to userspace...
thanks,
greg k-h
