On 2/22/18 11:58 AM, David Miller wrote: > From: David Ahern <dsah...@gmail.com> > Date: Wed, 21 Feb 2018 11:16:35 -0700 > >> On 2/20/18 12:45 AM, Jiri Pirko wrote: >>> From: Ido Schimmel <ido...@mellanox.com> >>> >>> Up until now we only allowed VLAN devices to be put in a VLAN-unaware >>> bridge, but some users need the ability to enslave physical ports as >>> well. >>> >>> This is achieved by mapping the port and VID 1 to the bridge's vFID, >>> instead of the port and the VID used by the VLAN device. >>> >>> The above is valid because as long as the port is not enslaved to a >>> bridge, VID 1 is guaranteed to be configured as PVID and egress >>> untagged. >>> >>> Signed-off-by: Ido Schimmel <ido...@mellanox.com> >>> Signed-off-by: Jiri Pirko <j...@mellanox.com> >>> --- >>> drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c | 12 +++++------- >>> 1 file changed, 5 insertions(+), 7 deletions(-) >>> >> >> Maybe I am missing something in the setup, but I am not getting >> host-to-host connectivity. I booted a switch with this patch, configured >> a bridge: > > I'm waiting for this discussion to be fully resolved before applying this > patch. Just FYI... >
Ido: IPv4 works at boot; IPv6 requires the mcast snooping disable. For this vlan-unaware bridges can that be set automatically? And then, what are the options for lldp?
