On 01/23/2018 07:03 AM, Sebastian Reichel wrote:
> This adds support for the Marvell switch and names the network
> ports according to the labels, that can be found next to the
> connectors ("ID", "IX", "ePort 1", "ePort 2"). The switch is
> connected to the host system using a PCI based network card.
>
> The PCI bus configuration has been written using the following
> information:
>
> root@b850v3# lspci -tv
> -[0000:00]---00.0-[01]----00.0-[02-05]--+-01.0-[03]----00.0 Intel
> Corporation I210 Gigabit Network Connection
> +-02.0-[04]----00.0 Intel
> Corporation I210 Gigabit Network Connection
> \-03.0-[05]--
> root@b850v3# lspci -nn
> 00:00.0 PCI bridge [0604]: Synopsys, Inc. Device [16c3:abcd] (rev 01)
> 01:00.0 PCI bridge [0604]: PLX Technology, Inc. PEX 8605 PCI Express 4-port
> Gen2 Switch [10b5:8605] (rev ab)
> 02:01.0 PCI bridge [0604]: PLX Technology, Inc. PEX 8605 PCI Express 4-port
> Gen2 Switch [10b5:8605] (rev ab)
> 02:02.0 PCI bridge [0604]: PLX Technology, Inc. PEX 8605 PCI Express 4-port
> Gen2 Switch [10b5:8605] (rev ab)
> 02:03.0 PCI bridge [0604]: PLX Technology, Inc. PEX 8605 PCI Express 4-port
> Gen2 Switch [10b5:8605] (rev ab)
> 03:00.0 Ethernet controller [0200]: Intel Corporation I210 Gigabit Network
> Connection [8086:1533] (rev 03)
> 04:00.0 Ethernet controller [0200]: Intel Corporation I210 Gigabit Network
> Connection [8086:1533] (rev 03)
>
> Signed-off-by: Sebastian Reichel <sebastian.reic...@collabora.co.uk>
Reviewed-by: Florian Fainelli <f.faine...@gmail.com>
--
Florian
