[PATCH v3 net,stable 2/2] net: fec: defer probe if regulator is not ready

[Fugang Duan]

Defer probe if regulator is not ready. E.g. some regulator is fixed
regulator controlled by i2c expander gpio, the i2c device may be probed
after the driver, then it should handle the case of defer probe error.

Signed-off-by: Fugang Duan <fugang.d...@nxp.com>
---
 drivers/net/ethernet/freescale/fec_main.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/net/ethernet/freescale/fec_main.c 
b/drivers/net/ethernet/freescale/fec_main.c
index 732a8e3..a32fbf5 100644
--- a/drivers/net/ethernet/freescale/fec_main.c
+++ b/drivers/net/ethernet/freescale/fec_main.c
@@ -3489,6 +3489,10 @@ static int fec_enet_get_irq_cnt(struct platform_device 
*pdev)
                        goto failed_regulator;
                }
        } else {
+               if (PTR_ERR(fep->reg_phy) == -EPROBE_DEFER) {
+                       ret = -EPROBE_DEFER;
+                       goto failed_regulator;
+               }
                fep->reg_phy = NULL;
        }
 
-- 
1.9.1