Hi all, This series adds 1000BaseX and 2500BaseX support to the Marvell PPv2 driver. In order to use it, the 2.5 SGMII mode is added in the Marvell common PHY driver (cp110-comphy).
Thanks to theses patches the fourth network interface can be used on the mcbin, and two patches are attached: one to describe the interface in the mcbin device tree, and another one adding Ethernet aliases now that the four interfaces are described. This was tested on a mcbin. Patches 1 and 2 should go through the PHY tree, patches 3 and 4 through the net-next tree and patches 5 and 6 through the mvebu one. Please note the two mvpp2 patches do not conflict with the ACPI series Marcin sent a few days ago, and the two series can be processed in parallel. (Marcin is aware of me sending this series). Thanks! Antoine Antoine Tenart (5): phy: add 2.5G SGMII mode to the phy_mode enum phy: cp110-comphy: 2.5G SGMII mode net: mvpp2: 1000baseX support net: mvpp2: 2500baseX support arm64: dts: marvell: mcbin: enable the fourth network interface Yan Markman (1): arm64: dts: marvell: add Ethernet aliases arch/arm64/boot/dts/marvell/armada-7040-db.dts | 6 ++ arch/arm64/boot/dts/marvell/armada-8040-db.dts | 7 +++ arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts | 15 +++++ drivers/net/ethernet/marvell/mvpp2.c | 67 +++++++++++++++++++---- drivers/phy/marvell/phy-mvebu-cp110-comphy.c | 17 +++++- include/linux/phy/phy.h | 1 + 6 files changed, 100 insertions(+), 13 deletions(-) -- 2.14.3
