The driver code qede_free_fp_array() depend on kfree() can be called
with a NULL pointer. This stems from the qede_alloc_fp_array()
function which either (kz)alloc memory for fp->txq or fp->rxq.
This also simplifies error handling code in case of memory allocation
failures, but xdp_rxq_info_unreg need to know the difference.
Introduce xdp_rxq_info_is_reg() to handle if a memory allocation fails
and detect this is the failure path by seeing that xdp_rxq_info was
not registred yet, which first happens after successful alloaction in
qede_init_fp().
Driver hook points for xdp_rxq_info:
* reg : qede_init_fp
* unreg: qede_free_fp_array
Tested on actual hardware with samples/bpf program.
V2: Driver have no proper error path for failed XDP RX-queue info reg, as
qede_init_fp() is a void function.
Cc: everest-linux...@cavium.com
Cc: Ariel Elior <ariel.el...@cavium.com>
Signed-off-by: Jesper Dangaard Brouer <bro...@redhat.com>
---
drivers/net/ethernet/qlogic/qede/qede.h | 2 ++
drivers/net/ethernet/qlogic/qede/qede_fp.c | 1 +
drivers/net/ethernet/qlogic/qede/qede_main.c | 10 ++++++++++
include/net/xdp.h | 1 +
net/core/xdp.c | 6 ++++++
5 files changed, 20 insertions(+)
diff --git a/drivers/net/ethernet/qlogic/qede/qede.h
b/drivers/net/ethernet/qlogic/qede/qede.h
index a3a70ade411f..62f47736511b 100644
--- a/drivers/net/ethernet/qlogic/qede/qede.h
+++ b/drivers/net/ethernet/qlogic/qede/qede.h
@@ -40,6 +40,7 @@
#include <linux/kernel.h>
#include <linux/mutex.h>
#include <linux/bpf.h>
+#include <net/xdp.h>
#include <linux/qed/qede_rdma.h>
#include <linux/io.h>
#ifdef CONFIG_RFS_ACCEL
@@ -345,6 +346,7 @@ struct qede_rx_queue {
u64 xdp_no_pass;
void *handle;
+ struct xdp_rxq_info xdp_rxq;
};
union db_prod {
diff --git a/drivers/net/ethernet/qlogic/qede/qede_fp.c
b/drivers/net/ethernet/qlogic/qede/qede_fp.c
index 48ec4c56cddf..dafc079ab6b9 100644
--- a/drivers/net/ethernet/qlogic/qede/qede_fp.c
+++ b/drivers/net/ethernet/qlogic/qede/qede_fp.c
@@ -1006,6 +1006,7 @@ static bool qede_rx_xdp(struct qede_dev *edev,
xdp.data = xdp.data_hard_start + *data_offset;
xdp_set_data_meta_invalid(&xdp);
xdp.data_end = xdp.data + *len;
+ xdp.rxq = &rxq->xdp_rxq;
/* Queues always have a full reset currently, so for the time
* being until there's atomic program replace just mark read
diff --git a/drivers/net/ethernet/qlogic/qede/qede_main.c
b/drivers/net/ethernet/qlogic/qede/qede_main.c
index 57332b3e5e64..24160f1fd0e5 100644
--- a/drivers/net/ethernet/qlogic/qede/qede_main.c
+++ b/drivers/net/ethernet/qlogic/qede/qede_main.c
@@ -762,6 +762,12 @@ static void qede_free_fp_array(struct qede_dev *edev)
fp = &edev->fp_array[i];
kfree(fp->sb_info);
+ /* Handle mem alloc failure case where qede_init_fp
+ * didn't register xdp_rxq_info yet.
+ * Implicit only (fp->type & QEDE_FASTPATH_RX)
+ */
+ if (fp->rxq && xdp_rxq_info_is_reg(&fp->rxq->xdp_rxq))
+ xdp_rxq_info_unreg(&fp->rxq->xdp_rxq);
kfree(fp->rxq);
kfree(fp->xdp_tx);
kfree(fp->txq);
@@ -1498,6 +1504,10 @@ static void qede_init_fp(struct qede_dev *edev)
else
fp->rxq->data_direction = DMA_FROM_DEVICE;
fp->rxq->dev = &edev->pdev->dev;
+
+ /* Driver have no error path from here */
+ WARN_ON(xdp_rxq_info_reg(&fp->rxq->xdp_rxq, edev->ndev,
+ fp->rxq->rxq_id) < 0);
}
if (fp->type & QEDE_FASTPATH_TX) {
diff --git a/include/net/xdp.h b/include/net/xdp.h
index 8c6e83293bba..9b29e06e4687 100644
--- a/include/net/xdp.h
+++ b/include/net/xdp.h
@@ -43,5 +43,6 @@ int xdp_rxq_info_reg(struct xdp_rxq_info *xdp_rxq,
struct net_device *dev, u32 queue_index);
void xdp_rxq_info_unreg(struct xdp_rxq_info *xdp_rxq);
void xdp_rxq_info_unused(struct xdp_rxq_info *xdp_rxq);
+bool xdp_rxq_info_is_reg(struct xdp_rxq_info *xdp_rxq);
#endif /* __LINUX_NET_XDP_H__ */
diff --git a/net/core/xdp.c b/net/core/xdp.c
index dde541b71aaa..5af17c44b92d 100644
--- a/net/core/xdp.c
+++ b/net/core/xdp.c
@@ -66,3 +66,9 @@ void xdp_rxq_info_unused(struct xdp_rxq_info *xdp_rxq)
xdp_rxq->reg_state = REG_STATE_UNUSED;
}
EXPORT_SYMBOL_GPL(xdp_rxq_info_unused);
+
+bool xdp_rxq_info_is_reg(struct xdp_rxq_info *xdp_rxq)
+{
+ return (xdp_rxq->reg_state == REG_STATE_REGISTERED);
+}
+EXPORT_SYMBOL_GPL(xdp_rxq_info_is_reg);
