When configuring an IPv6 address mask, we should use SLICE_NUM_MASK as
the mask in order to make sure all bits are masked by the hardware.
Also, we want matching entries to have a CHAIN_ID value set to the same
value as the rule index we return to user-space for convenience, so fix
that too.
Fixes: ba0696c22e7c ("net: dsa: bcm_sf2: Add support for IPv6 CFP rules")
Fixes: dd8eff68343d ("net: dsa: bcm_sf2: Allow matching arbitrary IPv6
masks/lengths")
Signed-off-by: Florian Fainelli <f.faine...@gmail.com>
---
drivers/net/dsa/bcm_sf2_cfp.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/dsa/bcm_sf2_cfp.c b/drivers/net/dsa/bcm_sf2_cfp.c
index b721a2009b50..23b45da784cb 100644
--- a/drivers/net/dsa/bcm_sf2_cfp.c
+++ b/drivers/net/dsa/bcm_sf2_cfp.c
@@ -625,7 +625,7 @@ static int bcm_sf2_cfp_ipv6_rule_set(struct bcm_sf2_priv
*priv, int port,
bcm_sf2_cfp_slice_ipv6(priv, v6_spec->ip6src, v6_spec->psrc,
slice_num, false);
bcm_sf2_cfp_slice_ipv6(priv, v6_m_spec->ip6src, v6_m_spec->psrc,
- slice_num, true);
+ SLICE_NUM_MASK, true);
/* Insert into TCAM now because we need to insert a second rule */
bcm_sf2_cfp_rule_addr_set(priv, rule_index[0]);
@@ -699,7 +699,7 @@ static int bcm_sf2_cfp_ipv6_rule_set(struct bcm_sf2_priv
*priv, int port,
/* Insert into Action and policer RAMs now, set chain ID to
* the one we are chained to
*/
- ret = bcm_sf2_cfp_act_pol_set(priv, rule_index[0], port_num,
+ ret = bcm_sf2_cfp_act_pol_set(priv, rule_index[1], port_num,
queue_num, true);
if (ret)
goto out_err;
--
2.14.3
