From: Tristram Ha <tristram...@microchip.com>
Modify tag_ksz.c so that tail tag code can be used by other KSZ switch
drivers.
Signed-off-by: Tristram Ha <tristram...@microchip.com>
Reviewed-by: Woojung Huh <woojung....@microchip.com>
---
v2
- No new feature is introduced
v1
- Switch driver code is not accessed from tag_ksz.c
drivers/net/dsa/microchip/Kconfig | 2 +-
drivers/net/dsa/microchip/ksz9477.c | 2 +-
include/net/dsa.h | 2 +-
net/dsa/Kconfig | 4 ++
net/dsa/dsa.c | 4 +-
net/dsa/dsa_priv.h | 2 +-
net/dsa/tag_ksz.c | 90 ++++++++++++++++++++++++-------------
7 files changed, 70 insertions(+), 36 deletions(-)
diff --git a/drivers/net/dsa/microchip/Kconfig
b/drivers/net/dsa/microchip/Kconfig
index 5a8660d..ab8f9f6 100644
--- a/drivers/net/dsa/microchip/Kconfig
+++ b/drivers/net/dsa/microchip/Kconfig
@@ -1,7 +1,7 @@
menuconfig MICROCHIP_KSZ9477
tristate "Microchip KSZ9477 series switch support"
depends on NET_DSA
- select NET_DSA_TAG_KSZ
+ select NET_DSA_TAG_KSZ9477
help
This driver adds support for Microchip KSZ9477 switch chips.
diff --git a/drivers/net/dsa/microchip/ksz9477.c
b/drivers/net/dsa/microchip/ksz9477.c
index 4e998a4..c735dca 100644
--- a/drivers/net/dsa/microchip/ksz9477.c
+++ b/drivers/net/dsa/microchip/ksz9477.c
@@ -344,7 +344,7 @@ static void ksz9477_port_init_cnt(struct ksz_device *dev,
int port)
static enum dsa_tag_protocol ksz9477_get_tag_protocol(struct dsa_switch *ds,
int port)
{
- return DSA_TAG_PROTO_KSZ;
+ return DSA_TAG_PROTO_KSZ9477;
}
static int ksz9477_phy_read16(struct dsa_switch *ds, int addr, int reg)
diff --git a/include/net/dsa.h b/include/net/dsa.h
index 2a05738..3d23c0b 100644
--- a/include/net/dsa.h
+++ b/include/net/dsa.h
@@ -32,7 +32,7 @@ enum dsa_tag_protocol {
DSA_TAG_PROTO_BRCM_PREPEND,
DSA_TAG_PROTO_DSA,
DSA_TAG_PROTO_EDSA,
- DSA_TAG_PROTO_KSZ,
+ DSA_TAG_PROTO_KSZ9477,
DSA_TAG_PROTO_LAN9303,
DSA_TAG_PROTO_MTK,
DSA_TAG_PROTO_QCA,
diff --git a/net/dsa/Kconfig b/net/dsa/Kconfig
index 03c3bdf..809b0e2 100644
--- a/net/dsa/Kconfig
+++ b/net/dsa/Kconfig
@@ -32,6 +32,10 @@ config NET_DSA_TAG_EDSA
config NET_DSA_TAG_KSZ
bool
+config NET_DSA_TAG_KSZ9477
+ bool
+ select NET_DSA_TAG_KSZ
+
config NET_DSA_TAG_LAN9303
bool
diff --git a/net/dsa/dsa.c b/net/dsa/dsa.c
index 6a9d0f5..92056a7 100644
--- a/net/dsa/dsa.c
+++ b/net/dsa/dsa.c
@@ -53,8 +53,8 @@ static struct sk_buff *dsa_slave_notag_xmit(struct sk_buff
*skb,
#ifdef CONFIG_NET_DSA_TAG_EDSA
[DSA_TAG_PROTO_EDSA] = &edsa_netdev_ops,
#endif
-#ifdef CONFIG_NET_DSA_TAG_KSZ
- [DSA_TAG_PROTO_KSZ] = &ksz_netdev_ops,
+#ifdef CONFIG_NET_DSA_TAG_KSZ9477
+ [DSA_TAG_PROTO_KSZ9477] = &ksz9477_netdev_ops,
#endif
#ifdef CONFIG_NET_DSA_TAG_LAN9303
[DSA_TAG_PROTO_LAN9303] = &lan9303_netdev_ops,
diff --git a/net/dsa/dsa_priv.h b/net/dsa/dsa_priv.h
index 7d03669..a2955a8 100644
--- a/net/dsa/dsa_priv.h
+++ b/net/dsa/dsa_priv.h
@@ -200,7 +200,7 @@ static inline struct dsa_port *dsa_slave_to_port(const
struct net_device *dev)
extern const struct dsa_device_ops edsa_netdev_ops;
/* tag_ksz.c */
-extern const struct dsa_device_ops ksz_netdev_ops;
+extern const struct dsa_device_ops ksz9477_netdev_ops;
/* tag_lan9303.c */
extern const struct dsa_device_ops lan9303_netdev_ops;
diff --git a/net/dsa/tag_ksz.c b/net/dsa/tag_ksz.c
index 0f62eff..7343270 100644
--- a/net/dsa/tag_ksz.c
+++ b/net/dsa/tag_ksz.c
@@ -14,34 +14,21 @@
#include <net/dsa.h>
#include "dsa_priv.h"
-/* For Ingress (Host -> KSZ), 2 bytes are added before FCS.
- * ---------------------------------------------------------------------------
- * DA(6bytes)|SA(6bytes)|....|Data(nbytes)|tag0(1byte)|tag1(1byte)|FCS(4bytes)
- * ---------------------------------------------------------------------------
- * tag0 : Prioritization (not used now)
- * tag1 : each bit represents port (eg, 0x01=port1, 0x02=port2, 0x10=port5)
- *
- * For Egress (KSZ -> Host), 1 byte is added before FCS.
- * ---------------------------------------------------------------------------
- * DA(6bytes)|SA(6bytes)|....|Data(nbytes)|tag0(1byte)|FCS(4bytes)
- * ---------------------------------------------------------------------------
- * tag0 : zero-based value represents port
- * (eg, 0x00=port1, 0x02=port3, 0x06=port7)
- */
-
-#define KSZ_INGRESS_TAG_LEN 2
-#define KSZ_EGRESS_TAG_LEN 1
+/* Usually only one byte is used for tail tag. */
+#define KSZ_INGRESS_TAG_LEN 1
+#define KSZ_EGRESS_TAG_LEN 1
-static struct sk_buff *ksz_xmit(struct sk_buff *skb, struct net_device *dev)
+static struct sk_buff *ksz_xmit(struct sk_buff *skb, struct net_device *dev,
+ int len,
+ void (*set_tag)(void *ptr, u8 *addr, int p))
{
struct dsa_port *dp = dsa_slave_to_port(dev);
struct sk_buff *nskb;
int padlen;
- u8 *tag;
padlen = (skb->len >= ETH_ZLEN) ? 0 : ETH_ZLEN - skb->len;
- if (skb_tailroom(skb) >= padlen + KSZ_INGRESS_TAG_LEN) {
+ if (skb_tailroom(skb) >= padlen + len) {
/* Let dsa_slave_xmit() free skb */
if (__skb_put_padto(skb, skb->len + padlen, false))
return NULL;
@@ -49,7 +36,7 @@ static struct sk_buff *ksz_xmit(struct sk_buff *skb, struct
net_device *dev)
nskb = skb;
} else {
nskb = alloc_skb(NET_IP_ALIGN + skb->len +
- padlen + KSZ_INGRESS_TAG_LEN, GFP_ATOMIC);
+ padlen + len, GFP_ATOMIC);
if (!nskb)
return NULL;
skb_reserve(nskb, NET_IP_ALIGN);
@@ -70,33 +57,76 @@ static struct sk_buff *ksz_xmit(struct sk_buff *skb, struct
net_device *dev)
consume_skb(skb);
}
- tag = skb_put(nskb, KSZ_INGRESS_TAG_LEN);
- tag[0] = 0;
- tag[1] = 1 << dp->index; /* destination port */
+ set_tag(skb_put(nskb, len), skb_mac_header(nskb), dp->index);
return nskb;
}
static struct sk_buff *ksz_rcv(struct sk_buff *skb, struct net_device *dev,
- struct packet_type *pt)
+ struct packet_type *pt,
+ int (*get_tag)(u8 *tag, int *port))
{
u8 *tag;
+ int len;
int source_port;
tag = skb_tail_pointer(skb) - KSZ_EGRESS_TAG_LEN;
- source_port = tag[0] & 7;
+ len = get_tag(tag, &source_port);
skb->dev = dsa_master_find_slave(dev, 0, source_port);
if (!skb->dev)
return NULL;
- pskb_trim_rcsum(skb, skb->len - KSZ_EGRESS_TAG_LEN);
+ pskb_trim_rcsum(skb, skb->len - len);
return skb;
}
-const struct dsa_device_ops ksz_netdev_ops = {
- .xmit = ksz_xmit,
- .rcv = ksz_rcv,
+/* For Ingress (Host -> KSZ9477), 2 bytes are added before FCS.
+ * ---------------------------------------------------------------------------
+ * DA(6bytes)|SA(6bytes)|....|Data(nbytes)|tag0(1byte)|tag1(1byte)|FCS(4bytes)
+ * ---------------------------------------------------------------------------
+ * tag0 : Prioritization (not used now)
+ * tag1 : each bit represents port (eg, 0x01=port1, 0x02=port2, 0x10=port5)
+ *
+ * For Egress (KSZ9477 -> Host), 1 byte is added before FCS.
+ * ---------------------------------------------------------------------------
+ * DA(6bytes)|SA(6bytes)|....|Data(nbytes)|tag0(1byte)|FCS(4bytes)
+ * ---------------------------------------------------------------------------
+ * tag0 : zero-based value represents port
+ * (eg, 0x00=port1, 0x02=port3, 0x06=port7)
+ */
+
+#define KSZ9477_INGRESS_TAG_LEN 2
+
+static int ksz9477_get_tag(u8 *tag, int *port)
+{
+ *port = tag[0] & 7;
+ return KSZ_EGRESS_TAG_LEN;
+}
+
+static void ksz9477_set_tag(void *ptr, u8 *addr, int p)
+{
+ u16 *tag = (u16 *)ptr;
+
+ *tag = 1 << p;
+ *tag = cpu_to_be16(*tag);
+}
+
+static struct sk_buff *ksz9477_xmit(struct sk_buff *skb,
+ struct net_device *dev)
+{
+ return ksz_xmit(skb, dev, KSZ9477_INGRESS_TAG_LEN, ksz9477_set_tag);
+}
+
+static struct sk_buff *ksz9477_rcv(struct sk_buff *skb, struct net_device *dev,
+ struct packet_type *pt)
+{
+ return ksz_rcv(skb, dev, pt, ksz9477_get_tag);
+}
+
+const struct dsa_device_ops ksz9477_netdev_ops = {
+ .xmit = ksz9477_xmit,
+ .rcv = ksz9477_rcv,
};
--
1.9.1
