> >>+static char *mix_port;
> >>+module_param(mix_port, charp, 0444);
> >>+MODULE_PARM_DESC(mix_port, "Specifies which ports connect to MIX
> >>interfaces.");
> >
> >Can you derive this from Device Tree /platform data configuration?
> >
> >>+
> >>+static char *pki_port;
> >>+module_param(pki_port, charp, 0444);
> >>+MODULE_PARM_DESC(pki_port, "Specifies which ports connect to the PKI.");
> >
> >Likewise
>
> The SoC is flexible in how it is configured. Technically the device tree
> should only be used to specify information about the physical configuration
> of the system that cannot be probed for, and this is about policy rather
> that physical wiring. That said, we do take the default configuration from
> the device tree, but give the option here to override via the module command
> line.
Module parameters are pretty much frowned upon.
You should really try to remove them all, if possible.
> >>+/* Registers are accessed via xkphys */
> >>+#define SSO_BASE 0x1670000000000ull
> >>+#define SSO_ADDR(node) (SET_XKPHYS + NODE_OFFSET(node)
> >>+ \
> >>+ SSO_BASE)
> >>+#define GRP_OFFSET(grp) ((grp) << 16)
> >>+#define GRP_ADDR(n, g) (SSO_ADDR(n) + GRP_OFFSET(g))
> >>+#define SSO_GRP_AQ_CNT(n, g) (GRP_ADDR(n, g) +
> >>0x20000700)
> >>+
> >>+#define MIO_PTP_BASE 0x1070000000000ull
> >>+#define MIO_PTP_ADDR(node) (SET_XKPHYS + NODE_OFFSET(node) + \
> >>+ MIO_PTP_BASE)
> >>+#define MIO_PTP_CLOCK_CFG(node) (MIO_PTP_ADDR(node)
> >>+ 0xf00)
> >>+#define MIO_PTP_CLOCK_HI(node) (MIO_PTP_ADDR(node)
> >>+ 0xf10)
> >>+#define MIO_PTP_CLOCK_COMP(node) (MIO_PTP_ADDR(node) + 0xf18)
> >
> >I am sure this will work great on anything but MIPS64 ;)
>
> Sarcasm duly noted.
>
> That said, by definition it is exactly an OCTEON-III/MIPS64, and can never
> be anything else. It is known a priori that the hardware and this driver
> will never be used anywhere else.
Please make sure your Kconfig really enforces this. Generally, we
suggest allowing the driver to be compiled when COMPILE_TEST is set.
That gives you better compiler test coverage. But it seems like this
driver won't compile under such conditions.
> >>+static int num_packet_buffers = 768;
> >>+module_param(num_packet_buffers, int, 0444);
> >>+MODULE_PARM_DESC(num_packet_buffers,
> >>+ "Number of packet buffers to allocate per port.");
> >
> >Consider implementing ethtool -g/G for this.
>
> That may be work for a follow-on patch.
Then please remove the module parameter now.
> >>+static int rx_queues = 1;
> >>+module_param(rx_queues, int, 0444);
> >>+MODULE_PARM_DESC(rx_queues, "Number of RX threads per port.");
> >
> >Same thing, can you consider using an ethtool knob for that?
>
> Also may be work for a follow-on patch.
Ditto
> >>+/**
> >>+ * Reads a 64 bit value from the processor local scratchpad memory.
> >>+ *
> >>+ * @param offset byte offset into scratch pad to read
> >>+ *
> >>+ * @return value read
> >>+ */
> >>+static inline u64 scratch_read64(u64 offset)
> >>+{
> >>+ return *(u64 *)((long)SCRATCH_BASE + offset);
> >>+}
> >
> >No barriers needed whatsoever?
>
> Nope.
Then it would be good to add a comment about why no barrier is
needed. Otherwise people are going to ask why there is no barrier,
submit patches adding barriers, etc.
Andrew
