Removing the DP83822 device from the DP83848 to
support the TI DP83822 dedicated driver that will
initially support WoL settings.
Signed-off-by: Dan Murphy <dmur...@ti.com>
---
v2 - There was no v1 on this patch this is new.
drivers/net/phy/dp83848.c | 3 ---
1 file changed, 3 deletions(-)
diff --git a/drivers/net/phy/dp83848.c b/drivers/net/phy/dp83848.c
index 3de4fe4dda77..3966d43c5146 100644
--- a/drivers/net/phy/dp83848.c
+++ b/drivers/net/phy/dp83848.c
@@ -20,7 +20,6 @@
#define TI_DP83620_PHY_ID 0x20005ce0
#define NS_DP83848C_PHY_ID 0x20005c90
#define TLK10X_PHY_ID 0x2000a210
-#define TI_DP83822_PHY_ID 0x2000a240
/* Registers */
#define DP83848_MICR 0x11 /* MII Interrupt Control Register
*/
@@ -80,7 +79,6 @@ static struct mdio_device_id __maybe_unused dp83848_tbl[] = {
{ NS_DP83848C_PHY_ID, 0xfffffff0 },
{ TI_DP83620_PHY_ID, 0xfffffff0 },
{ TLK10X_PHY_ID, 0xfffffff0 },
- { TI_DP83822_PHY_ID, 0xfffffff0 },
{ }
};
MODULE_DEVICE_TABLE(mdio, dp83848_tbl);
@@ -110,7 +108,6 @@ static struct phy_driver dp83848_driver[] = {
DP83848_PHY_DRIVER(NS_DP83848C_PHY_ID, "NS DP83848C 10/100 Mbps PHY"),
DP83848_PHY_DRIVER(TI_DP83620_PHY_ID, "TI DP83620 10/100 Mbps PHY"),
DP83848_PHY_DRIVER(TLK10X_PHY_ID, "TI TLK10X 10/100 Mbps PHY"),
- DP83848_PHY_DRIVER(TI_DP83822_PHY_ID, "TI DP83822 10/100 Mbps PHY"),
};
module_phy_driver(dp83848_driver);
--
2.14.0
