On Tue, Oct 03, 2017 at 01:41:34PM -0700, Troy Kisky wrote:
> On 10/2/2017 5:51 PM, Andrew Lunn wrote:
> > On Mon, Oct 02, 2017 at 05:04:41PM -0700, Troy Kisky wrote:
> >> imx7s/imx7d has the ptp interrupt newly added as well.
> >> This will allow the ptp interrupt to have its own interrupt routine.
> >>
> >> Signed-off-by: Troy Kisky <troy.ki...@boundarydevices.com>
> >> ---
> >> arch/arm/boot/dts/imx6qdl.dtsi | 1 +
> >> arch/arm/boot/dts/imx6sx.dtsi | 2 ++
> >> arch/arm/boot/dts/imx6ul.dtsi | 2 ++
> >> arch/arm/boot/dts/imx7d.dtsi | 4 +++-
> >> arch/arm/boot/dts/imx7s.dtsi | 4 +++-
> >> 5 files changed, 11 insertions(+), 2 deletions(-)
> >>
> >> diff --git a/arch/arm/boot/dts/imx6qdl.dtsi
> >> b/arch/arm/boot/dts/imx6qdl.dtsi
> >> index 8884b4a3cafb..d848d2bfe8e2 100644
> >> --- a/arch/arm/boot/dts/imx6qdl.dtsi
> >> +++ b/arch/arm/boot/dts/imx6qdl.dtsi
> >> @@ -1017,6 +1017,7 @@
> >> fec: ethernet@02188000 {
> >> compatible = "fsl,imx6q-fec";
> >> reg = <0x02188000 0x4000>;
> >> + interrupt-names = "","ptp";
> >
> > Hi Troy
> >
> > The "" looks a bit odd. Can you use a name here?
> >
> > Andrew
> >
>
> Sure. Can I use "q0","q1","q2", and look them up by name in fec_main
> as well ?
Hi Troy
Is there no better name? How does the datasheet name them?
> Should I worrying about compatiblity with old dtbs ?
Yes. You cannot break old dtb blobs. So i would suggest keep looking
up the old interrupts by number. But this new interrupt you can use
the name.
Andrew
