[net-next 2/2] ifb: add device MTU validation check

[Zhang Shengju]

Currently, any mtu value can be assigned when adding a new ifb device:
[~]# ip link add name ifb2 mtu 100000 type ifb
[~]# ip link show ifb2
18: ifb2: <BROADCAST,NOARP> mtu 100000 qdisc noop state DOWN mode DEFAULT group 
default qlen 32
    link/ether 7a:bf:f4:63:da:d1 brd ff:ff:ff:ff:ff:ff

This patch adds device MTU validation check.

Signed-off-by: Zhang Shengju <zhangshen...@cmss.chinamobile.com>
---
 drivers/net/ifb.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/net/ifb.c b/drivers/net/ifb.c
index 8870bd2..ce84ad2 100644
--- a/drivers/net/ifb.c
+++ b/drivers/net/ifb.c
@@ -282,6 +282,14 @@ static int ifb_validate(struct nlattr *tb[], struct nlattr 
*data[],
                if (!is_valid_ether_addr(nla_data(tb[IFLA_ADDRESS])))
                        return -EADDRNOTAVAIL;
        }
+
+       if (tb[IFLA_MTU]) {
+               u32 mtu = nla_get_u32(tb[IFLA_MTU]);
+
+               if (mtu < ETH_MIN_MTU || mtu > ETH_DATA_LEN)
+                       return -EINVAL;
+       }
+
        return 0;
 }
 
-- 
1.8.3.1