Some devices identify themselves as a virtual USB CDROM drive. The virtual CD
includes the windows driver. We aren't interested in this, so we eject the
virtual CDROM and then the real wireless device appears.

Signed-off-by: Daniel Drake <[EMAIL PROTECTED]>

Index: linux-2.6/drivers/net/wireless/zd1211rw/zd_usb.c
===================================================================
--- linux-2.6.orig/drivers/net/wireless/zd1211rw/zd_usb.c
+++ linux-2.6/drivers/net/wireless/zd1211rw/zd_usb.c
@@ -46,6 +46,8 @@ static struct usb_device_id usb_ids[] = 
        { USB_DEVICE(0x0ace, 0x1215), .driver_info = DEVICE_ZD1211B },
        { USB_DEVICE(0x157e, 0x300d), .driver_info = DEVICE_ZD1211B },
        { USB_DEVICE(0x079b, 0x0062), .driver_info = DEVICE_ZD1211B },
+       /* "Driverless" devices that need ejecting */
+       { USB_DEVICE(0x0ace, 0x2011), .driver_info = DEVICE_INSTALLER },
        {}
 };
 
@@ -914,6 +916,54 @@ static void print_id(struct usb_device *
 #define print_id(udev) do { } while (0)
 #endif
 
+static int eject_installer(struct usb_interface *intf)
+{
+       struct usb_device *udev = interface_to_usbdev(intf);
+       struct usb_host_interface *iface_desc = &intf->altsetting[0];
+       struct usb_endpoint_descriptor *endpoint;
+       unsigned char *cmd;
+       u8 bulk_out_ep;
+       int r;
+
+       /* Find bulk out endpoint */
+       endpoint = &iface_desc->endpoint[1].desc;
+       if ((endpoint->bEndpointAddress & USB_TYPE_MASK) == USB_DIR_OUT &&
+           (endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) ==
+           USB_ENDPOINT_XFER_BULK) {
+               bulk_out_ep = endpoint->bEndpointAddress;
+       } else {
+               dev_err(&udev->dev,
+                       "zd1211rw: Could not find bulk out endpoint\n");
+               return -ENODEV;
+       }
+
+       cmd = kzalloc(31, GFP_KERNEL);
+       if (cmd == NULL)
+               return -ENODEV;
+
+       /* USB bulk command block */
+       cmd[0] = 0x55;  /* bulk command signature */
+       cmd[1] = 0x53;  /* bulk command signature */
+       cmd[2] = 0x42;  /* bulk command signature */
+       cmd[3] = 0x43;  /* bulk command signature */
+       cmd[14] = 6;    /* command length */
+
+       cmd[15] = 0x1b; /* SCSI command: START STOP UNIT */
+       cmd[19] = 0x2;  /* eject disc */
+
+       dev_info(&udev->dev, "Ejecting virtual installer media...\n");
+       r = usb_bulk_msg(udev, usb_sndbulkpipe(udev, bulk_out_ep),
+               cmd, 31, NULL, 2000);
+       if (r)
+               return r;
+
+       /* At this point, the device disconnects and reconnects with the real
+        * ID numbers. */
+
+       usb_set_intfdata(intf, NULL);
+       return 0;
+}
+
 static int probe(struct usb_interface *intf, const struct usb_device_id *id)
 {
        int r;
@@ -922,6 +972,9 @@ static int probe(struct usb_interface *i
 
        print_id(udev);
 
+       if (id->driver_info & DEVICE_INSTALLER)
+               return eject_installer(intf);
+
        switch (udev->speed) {
        case USB_SPEED_LOW:
        case USB_SPEED_FULL:
@@ -987,6 +1040,11 @@ static void disconnect(struct usb_interf
        struct zd_mac *mac = zd_netdev_mac(netdev);
        struct zd_usb *usb = &mac->chip.usb;
 
+       /* Either something really bad happened, or we're just dealing with
+        * a DEVICE_INSTALLER. */
+       if (netdev == NULL)
+               return;
+
        dev_dbg_f(zd_usb_dev(usb), "\n");
 
        zd_netdev_disconnect(netdev);
Index: linux-2.6/drivers/net/wireless/zd1211rw/zd_usb.h
===================================================================
--- linux-2.6.orig/drivers/net/wireless/zd1211rw/zd_usb.h
+++ linux-2.6/drivers/net/wireless/zd1211rw/zd_usb.h
@@ -30,6 +30,7 @@
 enum devicetype {
        DEVICE_ZD1211  = 0,
        DEVICE_ZD1211B = 1,
+       DEVICE_INSTALLER = 2,
 };
 
 enum endpoints {
-
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to