Add a debug filesystem "fdb" entry to query a port's hardware FDB
entries through the .port_fdb_dump switch operation.
This is really convenient to query directly the hardware or inspect DSA
or CPU links, since these ports are not exposed to userspace.
# cat port1/fdb
vid 0 12:34:56:78:90:ab unicast static
Signed-off-by: Vivien Didelot <vivien.dide...@savoirfairelinux.com>
Reviewed-by: Florian Fainelli <f.faine...@gmail.com>
Reviewed-by: Andrew Lunn <and...@lunn.ch>
---
net/dsa/debugfs.c | 31 +++++++++++++++++++++++++++++++
1 file changed, 31 insertions(+)
diff --git a/net/dsa/debugfs.c b/net/dsa/debugfs.c
index 7b299c9d9892..59c09a67bc23 100644
--- a/net/dsa/debugfs.c
+++ b/net/dsa/debugfs.c
@@ -10,6 +10,7 @@
*/
#include <linux/debugfs.h>
+#include <linux/etherdevice.h>
#include <linux/seq_file.h>
#include "dsa_priv.h"
@@ -109,6 +110,31 @@ static int dsa_debugfs_create_file(struct dsa_switch *ds,
struct dentry *dir,
return 0;
}
+static int dsa_debugfs_fdb_dump_cb(const unsigned char *addr, u16 vid,
+ bool is_static, void *data)
+{
+ struct seq_file *seq = data;
+
+ seq_printf(seq, "vid %d %pM %s %s\n", vid, addr,
+ is_unicast_ether_addr(addr) ? "unicast" : "multicast",
+ is_static ? "static" : "dynamic");
+
+ return 0;
+}
+
+static int dsa_debugfs_fdb_read(struct dsa_switch *ds, int id,
+ struct seq_file *seq)
+{
+ if (!ds->ops->port_fdb_dump)
+ return -EOPNOTSUPP;
+
+ return ds->ops->port_fdb_dump(ds, id, dsa_debugfs_fdb_dump_cb, seq);
+}
+
+static const struct dsa_debugfs_ops dsa_debugfs_fdb_ops = {
+ .read = dsa_debugfs_fdb_read,
+};
+
static void dsa_debugfs_regs_read_count(struct dsa_switch *ds, int id,
struct seq_file *seq, int count)
{
@@ -222,6 +248,11 @@ static int dsa_debugfs_create_port(struct dsa_switch *ds,
int port)
if (IS_ERR_OR_NULL(dir))
return -EFAULT;
+ err = dsa_debugfs_create_file(ds, dir, "fdb", port,
+ &dsa_debugfs_fdb_ops);
+ if (err)
+ return err;
+
err = dsa_debugfs_create_file(ds, dir, "regs", port,
&dsa_debugfs_regs_ops);
if (err)
--
2.14.1
